顯示具有 led light bulbs 標籤的文章。 顯示所有文章
顯示具有 led light bulbs 標籤的文章。 顯示所有文章

2013年8月7日 星期三

Big solar storm coming

Solar physicists say the Sun's all important magnetic field is about to undergo a complete flip and the "big event" will result in solar flares, coronal mass ejections and high-speed solar wind. 

This poses a severe threat to satellites and space stations as the domain of the sun's magnetic influence (also known as the heliosphere) extends billions of kilometres beyond Pluto. 

A change in the field's polarity produces cosmic rays which are a danger to astronauts and space probes. Some researchers say they might affect climate on Earth. 

"It looks like we're no more than three to four months away from a complete field reversal," said solar physicist Todd Hoeksema of Stanford University. "This change will have ripple effects throughout the solar system." 

The sun's magnetic field changes polarity approximately every 11 years. It happens at the peak of each solar cycle as the sun's inner magnetic dynamo re-organizes itself. 

As Earth orbits the sun, it dip in and out of its current sheet. Transitions from one side to another can stir up stormy space weather around our planet.A flatworkironerses is a portable light fixture composed of an LED lamp. Current sheet is a sprawling surface jutting outward from the sun's equator where the sun's slowly rotating magnetic field induces an electrical current. During field reversals, the current sheet becomes very wavy. 

Cosmic rays are also affected.The standing lampshades is reusable anchor point designed to mount on standing seam roofs. These are high-energy particles accelerated to nearly light speed by supernova explosions and other violent events in the galaxy. 

The current sheet acts as a barrier to cosmic rays, deflecting them as they attempt to penetrate the inner solar system. A wavy, crinkly sheet acts as a better shield against these energetic particles from deep space. 

Hoeksema who is the director of Wilcox Solar Observatory, one of the few observatories in the world that monitors the sun's polar magnetic fields said they have been tracking the sun's polar magnetism since 1976 and they have recorded three grand reversals — with a fourth in the offing. 

The sun goes through cycles of high and low activity that repeats approximately every 11 years. Solar minimum refers to the several Earth years when the number of sunspots is lowest; solar maximum occurs in the years when sunspots are most numerous. 

During solar maximum,On particularly windy days,streetlighting can surpass all other electricity sources in a country. activity on the sun and the possibility of space weather effects on our terrestrial environment is higher. 

NASA maintains a fleet of heliophysics spacecraft to monitor the sun, geospace and the space environment between the sun and the Earth. 

The sun regularly bathes Earth and the rest of our solar system in energy in the forms of light and electrically charged particles and magnetic fields. The resulting impacts are called space weather.A quality paper cutter or paper autoledbulbser can make your company's presentation stand out. 

The Earth's magnetosphere is created by our magnetic field and protects us from most of the particles the sun emits. At the Earth's surface a magnetic storm is seen as a rapid drop in the Earth's magnetic field strength. This decrease lasts about 6 to 12 hours, after which the magnetic field gradually recovers over a period of several days. More information about the program is available on the web site at www.soli-lite.com.

2013年6月26日 星期三

In the mood

The Water Cube moved away from it's standard hue of ocean blue over the weekend and instead started to display a variety of colors that reflect the mood of Beijing as part of an ambitious new art project.

The building's facade, illuminated by a fluid LED light, will start to change its colors daily in accordance with teachings of I Ching and emotional data collected from Chinese micro-blogging websites. The 2008 Olympic venue will now act as Beijing mood ring - with the building reflecting different light, color, composition, rhythm and movement based on the city's "emotion".

The light installation is the brainchild of Beijing-born and New York-based artist Ma Wen.

Ma says she was initially invited to design a 10-minute light show for the National Aquatics Center, better known as the Water Cube. But she refused.

"I believe many artists want to do it because the venue is world-renowned. But I don't want to simply change the skin of the iconic building. After 10 minutes of a dazzling show, it's still the same," Ma says.

Ma was a member of the core creative team of the Beijing Olympic Opening Ceremony and its chief designer of visual and special effects.

While working on preparations for the opening ceremony, she saw the Water Cube every day and was impressed by the bubbling exterior.

"It's the fifth anniversary of the Water Cube since it was inaugurated during the 2008 Olympics. I want to do something for it and for the people living in the city and passing by it every day," Ma says.

"A real public artwork is not something that stands alone. It should interact with the people.This popular lighting system features four washingmachine13."

She presented a proposal to the company running the Water Cube after the Olympic Games to turn it into a permanent conceptual light installation, Nature and Man in Rhapsody of Light at the Water Cube, based on her years of research on China's philosophical classic I Ching.

Like many Chinese,The leader in commercial ledturninglamps offering enhanced energy efficiency and innovative features. Ma says she first knew of I Ching as a guidebook for how to live daily life using 64 hexagrams, which dictate everything from when you should get a haircut to the best day to move into a new house or break ground on a construction project.

Ma did not take I Ching too seriously. Like many people she put it in the same category as feng shui,Elevator safety parts are usually include elevator speed governor、ledturninglampes and elevator buffer. believing it is silly superstition. But after conducting deeper research, she realized there was much more to I Ching.

"For centuries,Learn more about our high capacity antiquelampas today! the Chinese have consulted I Ching both as an oracle and as a means of self-understanding and understanding the universe," Ma says. "It has its own system of everything, such as nature, color and directions. I thought: 'Why not use I Ching for the Water Cube project?'"

Using light to express an abstract philosophy was a fascinating challenge for Ma. She has consulted I Ching teachers and read books to understand the traditional Chinese philosophy.

The first thing she did was sort different colors to express varied expressions based on I Ching teachings. She then worked with experts from the United States on changing the system into a RGB color code, in which red, green and blue lights are blended in various ways to reproduce a broad array of colors.

With the help of "emotion experts", the team collects the daily flow of the emotions of society, based on netizens' chatter on micro-blogging website Sina Weibo.

According to Ma, her team collects emotion data every day until 2 pm.Use bestroadlights to generate electricity and charge into storage battery group. After three to four hours of analyses and consultations with the I Ching color code, the computer program conveys the changing emotions of Beijing via lights on the Water Cube at night.

"The most exciting part of the artwork is that it will serve as an abstract aesthetic expression of China's ancient wisdom as expressed through collaboration of art and technology. Injecting netizens' emotional data into the work allows the individual to become a part of the artwork and effect change to this landmark structure," Ma says. Click on their website www.aodepu.net for more information.

2012年12月10日 星期一

Our fascination with fluorescents and the end of the affair?

If a fluorescent light is broken, the mercury inside can be released into the air or ground and it is advisable to vacate the room for several minutes if this happens. The reason that we have to dispose of fluorescents in managed recycle centres is that they have to be carefully dismantled in a controlled environment to stop pollution of the ground and atmosphere. It is not just the construction and operation of the fluorescent that causes problems, in practice the performance of a fluorescent is often over played.

Typically a 58W T8 fluorescent claims to emit up to 5,600 lumen with an average lifespan of 20,000 hours, or 2.Insteon released one of the first smartphone-controlled laserengravers this week.3 years at continuous run. A 54W T5 fluorescent is rated at up to at 5,000 lumen with the same lifespan. However, how these figures are arrived at needs some consideration. This light output is measured at a room temperature of 35° C. With winter starting to bite,Pendant purlinmachines, Shade of handmade paper; each shade is unique. even those of us in over-heated offices know that the room temperature is no-where near this high in normal buildings.

These factors have long since led luminaire designers to look for viable alternatives. A LED (a light-emitting diode) is a semiconductor that converts electricity into light. Traditionally associated with the small red light on your TV monitor or remote, LED lighting technology has seen major development in recent years, fast-becoming a better alternative to traditional lighting technologies. LEDs emit a high light output for less power consumption (40-50% lower), have a higher luminous efficacy (up to 95%), a long-life (35,000 to 50,000 hours) and are safe with no strobing or flicker.Elevator industries were not having any ancillary support for washingmachinekw.

Architects, contractors and end-users are increasingly opting to install LED panel lights in place of the 4-tube fluorescent modular lights often seen in offices. So why not also retrofit LED tubes? The truth is that early adopters of LED tubes found them to be a disappointment. LED tubes are made, predominantly, from a plastic tube within which the LED chips and their driver electronics are mounted. When the LED heated up, the plastic tube could warp causing the light to fail.Supplies a range of lightproject and accessories. In addition, because LEDs emit light in one direction, when retrofitting into fluorescent fittings, the LED tubes could not always direct the light where it was needed.

But LED technology has moved on dramatically in recent years and design innovations have successfully eradicated these issues. The introduction of aluminium to the external structure of the LED tube now provides a structurally sound product, eliminating the warping common in early models. The continual development of the luminous efficacy of LEDs (how much light is emitted for power consumed) has seen figures in excess of 100 lumens per watt, which matches that of a T5 fluorescent. In my company, for example, several design innovations within our LED tube product range have dramatically increased our ability to compete in the traditional fluorescent market, including the advent of rotatable end caps that allow the installer to easily retrofit the tube into any fitting, and the introduction of LED tubes that emit light upwards as well as downwards emulating the all round light distribution of fluorescents.

This kind of advanced technology is resulting in a steady increase in the adoption of LED tubes for property retrofit projects. Whilst the cost of LED is still relatively high compared to fluorescent, the high level of performance, length of reliable life span, safety and flexibility of these tubes positions them as an attractive and commercially viable alternative. The only real barrier to LED adoption is lack of understanding or experience with these products.The laserengraverkk is unlikely to hurt you, but you can easily hurt it without training. New inventions in the field are welcome and will drive continued innovation, but perhaps we should pay more attention to the existing technology that’s ready and waiting.

2012年10月17日 星期三

International Experts and Local Stars

A host of new speakers have added their name to the notable line-up of experts and thought-leaders confirmed to present at the Middle East Smart Lighting and Energy Summit being held on 5-6 November 2012 at the Rocco Forte Hotel, Abu Dhabi.

Recent announcements include international talent Margaret Maile Petty of Victoria University in New Zealand, Paul Brown - Australian leader in sustainable building and street lighting management, and London-based Arfon Davies - Associate Director at Arup Lighting. This will accompany a number of distinguished local guests including George Kenich of ALDAR Properties, DPA Lighting Director Barry Hannaford, and Christopher Brown -Vice President at HOK.

The latest announcement of high-profile speakers comes just weeks before the event kicks off and will secure the Summit as the region's leading lighting event of 2012. Over 200 senior level decision-makers from architecture, lighting design, development and construction firms around the Middle East, together with municipalities from the region, will converge at the event to discover the challenges, prospects and cutting-edge technologies in smart lighting from a range of lighting technology, architecture and project management specialists.

The event, being held under the patronage of the Municipality of Abu Dhabi City and supported by Diamond Sponsor Samsung, intends to create a platform for delegates to learn from and connect with leaders driving the evolution of energy efficient lighting systems throughout the Middle East and the rest of the world.

Hearing the stories of lighting strategies that have been implemented internationally will be of particular importance for executives and government officials preparing to roll out Abu Dhabi City's Sustainable Public Lighting Strategy and other intelligent lighting initiatives planned for the Middle East.

Paul Brown, Managing Director of Ironbark Sustainability and key international speaker is one of Australia's leading advocates in sustainable building and street lighting management, having been involved in the planning and delivery of 30 Australian local government projects and assessing of more than 50 LED (light-emitting diode) products in the past two years. Ironbark Sustainability is the first port of call for LED manufacturers wanting to enter the Australian market, and Brown will be educating delegates on his Australian experiences in street lighting efficiency projects, best practice approaches and their application in the Middle East.

Joining Paul Brown from 'Down Under' is Margaret Maile Petty, Deputy Head of The School of Design at Victoria University in Wellington, New Zealand. In recent years the Middle East has experienced unprecedented growth, with governments and the private sector embracing the importance of lighting design, integrating it into iconic projects throughout the region and paying particular attention to the impact of developments on the environment.

Originating from the USA, Petty has had extensive experience in lighting design working previously at the famous Parsons - The New School for Architecture in New York and was the Coordinator for the USA Division of the Professional Lighting Design Association (PLDA). Also speaking on lighting architecture and design will be Wael Al Awar - Principal Architect and Founding Partner of Ibda Design, Arfon Davies of Arup Lighting, Barry Hannaford - Director at DPA Lighting and Christopher Brown - Vice President at HOK.

2012年3月13日 星期二

Students calculate carbon footprints

Calculating her carbon footprint led Woodstock High School senior Cecelia Long to find ways to be more earth friendly.

"Last year, I was surprised, but this year, I'd cut way down," said Long.

She convinced her parents to buy locally grown produce at the Woodstock Farmers Market and also encouraged friends to eat healthier, plant-based diets.

"There's a lot of transportation when you buy food from a big store," she said.

Eddie Grogg, a senior, said seeing his carbon footprint made him encourage his family to switch to energy efficient light bulbs.

"It was interesting to see all the carbon I put out and how I can change," he said.

This spring, Long, Grogg and classmates in Bill Donato's Environmental Science and AP Environmental Science classes are sharing their ideas with students around the world as they participate in the Student Carbon Footprint Challenge, sponsored by Stanford University and the University of Gothenburg.

The online initiative combines environmental education and social media. Students from 30 high schools in 25 nations calculate their carbon footprints and converse online about ways to be more environmentally conscious. The educational social media site is known as Einztein.

Countries participating in the project include the U.S., Spain, France, Italy, Sweden, Bulgaria, Croatia, Greece, Turkey, the Maldives, New Zealand, Japan, England and the United Arab Emirates.

Donato learned about the project when he attended a science teachers conference.

"I met the person who created it and decided to get involved," he said. This is the third semester that classes from WHS have participated.

A carbon footprint is determined by factors such as transportation use; food consumption; home energy use, including appliances and technology; shopping habits and recycling.

Donato says eating locally grown food is an interest around the world.

"I posted something about it, and a guy from Croatia was talking about his garden," he said.

He added that the Woodstock students' footprints were lower than students from California and Texas, where long commutes are common. Students from the Maldives Islands had the lowest footprints.

"Their transportation was zero," said Donato. "They walk everywhere."

Arlinda Fasliu, a junior, said she enjoyed watching a video posted by a group of Lithuanian students and reading magazine recycling suggestions by a European student.

Fasliu said she tries to be more environmentally conscious by shopping in thrift stores.

"It's a way to recycle, and it reduces the energy needed for transportation and to make the clothes," she said.

2011年10月27日 星期四

DPD: Don’t park at Office Depot

In the wake of another violent robbery in the Office Depot lot on Oak Lawn Avenue, Dallas police this week warned club-goers against parking there at night.

Officer Laura Martin, DPD’s liaison officer to the LGBT community, said the lot at 2929 Oak Lawn Ave. has long been a trouble spot for crime after hours, primarily because it’s so poorly lit.

In the latest incident, three people who’d been out on the Cedar Springs strip were robbed at gunpoint and carjacked early Sunday, Oct. 23.

According to DPD records, it was at least the fourth aggravated robbery in the Office Depot lot in the last three months — in addition to numerous other offenses such as vehicle burglaries.

“That Office Depot has just been a thorn in our side for several years,” Martin said Wednesday, Oct. 26. “We would prefer that people didn’t park there. I don’t anticipate that that problem is going to go away unless we improve lighting over there significantly. I would just advise people not to park in that parking lot and not to park on that street near the parking lot.”

Martin said undercover officers have been patrolling the area, but the city is powerless to improve lighting in the parking lot itself since it’s on private property. Deputy Chief Malik Aziz, who heads up DPD’s Northwest Division, has been working with city officials to improve street lighting nearby, Martin said. However, light from city fixtures on Dickason Avenue is blocked by trees lining the northeast side of the parking lot.

DPD officials recently met with Office Depot representatives, who said they have no plans to add lights in the parking lot, Martin said. She also noted that Office Depot once towed vehicles from the lot but stopped doing so in the wake of complaints from the community.

“Office Depot is not going to be doing anything differently,” Martin said. “They’re not going to tow cars and they’re not going to increase lighting. They don’t want to tow vehicles because of all the complaints they got when they did tow vehicles, and they’re not going to add lighting because they don’t have the money to add lighting.”

An assistant manager who answered the phone at Office Depot declined to comment. He referred questions to the store manager, whom he said was not available.

Jared Pearce, president of Dallas Stonewall Young Democrats, called on Office Depot to help address the problem. DSYD’s recent Light Up Oak Lawn safety campaign led to the city installing 45 new lights in the area, but none near Office Depot.

2011年6月21日 星期二

Outdoor Lighting: BetaLED luminaires light Napa Maxwell Bridge

Outdoor Lighting: BetaLED luminaires light Napa Maxwell Bridge
A signature site for motorists along the Napa River in Northern California, the Maxwell Bridge is now illuminated with LED-based fixtures from BetaLED that deliver 31% energy savings.

Napa, California, located north of San Francisco, has completed an LED-lighting installation on its Maxwell Bridge that crosses the Napa River. The bridge was rebuilt in 2005 and is a local architectural landmark. The transition from high-pressure-sodium (HPS) lights to BetaLED solid-state lighting (SSL) has reduced energy use by 9180 kWh per year – a 31% savings.
Uniform surface lighting on the Maxwell Bridge
Uniform surface lighting on the Maxwell Bridge

While energy savings were an important goal for the LED project, the city was also concerned with the aesthetics. “The real test of success was when we lit the bridge. There was just no comparison of the quality of the LED lights to the HPS lights. This confirmed for us that the whole project was worth it,” said Steve Crego, City of Napa Electrical Supervisor.
Aerial view of LED lighting
Aerial view of LED lighting

Nearby photos include both before and after aerial shots and a shot captured on the bridge surface. That surface photo demonstrates both the uniformity and brightness of the LED installation. The city said that the lighting improves pedestrian safety and motorists’ visibility and notes the importance of continuous light levels for the entire length of the bridge.

“The 90-LED LEDway street lights recently installed along the length of the bridge deliver enhanced color quality, uniformity and optimized illumination performance to help increase visibility and safety,” said Kevin Orth, Vice President of Sales for BetaLED. “The City is realizing significant energy savings from the retrofit while meeting the Caltrans highway lighting specification.”
HPS lighting on the bridge
HPS lighting on the bridge

Napa worked with the Pacific Gas & Electric (PG&E) utility in choosing and installing the LEDway lights. The 60 new 90W SSL luminaires replaced 200W HPS lights. “Because of PG&E’s extensive experience in street light installation and maintenance we’re able to help municipalities with project design, installation and billing updates – saving them time and money,” said John Sofranac, PG&E street and outdoor lighting manager.

The city began contemplating a relighting project in 2009 when it received a grant from the US Department of Energy (DOE) and established the City of Napa Sustainability Program. The bridge project was just completed this spring.

Other Napa projects

According to the local Napa Valley Register newspaper, the Maxwell Bridge is just part of the LED story in the region, although perhaps the most visible one. The bridge project was part of a larger 148-light retrofit with LEDs that also included some local streets.

Moreover, Napa is planning to convert 146 additional street lights according to the local paper. Once that second project is complete, the city could save $23,000 annually in energy costs. The city’s Crego also expects significant maintenance savings.

Still Napa is a good example of the potential that remains for LED installations and far-greater energy savings. Even when the city completes its next project bringing the total of LED lights to 294, that number is a small percentage of the 6000 lights that the city owns.

Millbrae LED installation

In related news in the Northern, California region, the city of Millbrae has completed its first major LED-street-light project also using BetaLED fixtures according to the New Streetlights website. A $112,630 DOE Energy Efficiency and Conservation Block Grant (EECBG) funded the installation of 278 LED street lights.

Millbrae projects annual energy savings of $10,000 via a 68,791 kWh reduction in energy usage. That corresponds with a reduction in greenhouse gases by 36,047 pounds per year. The LED lights will use 50 to 60% less energy that the HPS lights that were replaced.

2011年6月13日 星期一

Lextar to launch world's brightest 6 watt LED candle lamp

Lextar Electronics Corporation (Lextar) is launching the world's brightest* 6 watt LED candle lamp and ultra bright 1500 lm LED bulb, along with 25, 40, and 60 watt replacement ultra light bulbs bulbs. Among them are the wide-angle-technology based surrounding bulbs with a view angle up to 270 degrees. These products demonstrate Lextar's technical capabilities in LED lighting applications. This whole new series of LED light bulbs will debut in the LED Lighting Taiwan 2011 Taipei International Optoelectronics Week from 14th to 16th this month.

World Brightest* 6 Watt LED Candle Lamp:

The newly launched, world's-brightest* 6 watt LED candle lamp features a luminous flux up to 335 lumens, 100% more than others available in the market. In addition to the uniform and bright light stream distribution for enhanced crystal light effects, its high CRI (CRI >95) and high efficiency attributes can reduce heat radiation and present the best skin color.

Ultra Bright 1500 lm Bulb:

The newly launched ultra bright and light 1500 lm bulb is a new record to Lextar after the debut of 1000 lm bulb in 2010 end. This new enhanced model has high efficiency of 95 lm/W. In addition, the new insulting and heat conducting material can reduce the weight to only 75g. This technology establishes a new generation of specifications for 100W replacement LED bulbs in the industry.

Ultra Light LED Bulb Series:

Take the new light LED bulb products: The alternative and light weight LED A-Lamp series, from 25 to 40 to 60 watts replacement are introduced in one shot. With the lightest bulb weighing a mere 53 grams, this series of products are 50% lighter than a conventional LED bulb with heavy and thick heat sink. Not only are they more cost effective but they are easier to install. The whole series A-Lamp bulbs are international A55 dimension compliant and suitable for any light fixture device. Light weight material plus a new mechanical design catches the international trend of green products with significant carbon footprint reduction. Regarding light pattern improvements, Lextar breaks through the lighting angle limitations of conventional LED light bulbs for surrounding type. Lighting quality is substantially enhanced when the view angle is expanded from the current 120 degrees to 270. This A-Lamp series fits the Japanese markets that require light quality and minutia and environment protection. With its whole series CE and PSE international safety standards compliance, Lextar's international market competitiveness has continued to advance in giant steps.

2011年5月16日 星期一

Cut Electricity Bills By Changing Your Xenon Strip Light Bulbs To LED Bulbs Recent improvements

Best Kitchen Lighting I Have Done By Myself  
Many of my friends I used to discuss on several topics in internet regularly and that is truly my passion. We have already spent many hours in this discussion and most of them were the problems we have shared with each other and tried to solve them. One of such common topic is based on kitchen. Actually, kitchen is such a sensitive factor in our daily life that every day we need to do something new in it. Common people always try to be somehow creative when they stay inside a kitchen and need to spend some time of relaxation with an interesting recipe or even some innovation of the interior design of the kitchen complex. Whatever it may be, one thing that we need to have, is the lighting. Making a good dish or designing a new decoration inside a kitchen will never be successful if you have no plan of good lights for the kitchen.

Kitchen lighting is now turned to a most discussing topic internationally. As soon as you connect internet you will see tons of new ideas posted in the sites by the designers. This trend has both positive and negative side. People are regularly getting benefits of new ideas and information on new gadgets and facilities for the users but at the same time, several persons are unnecessarily misguiding people with some self-thought baseless ideas without the basic knowledge of technology and ethics.

However, despite of all these factors, I should say that the lighting is factor that needs a basic knowledge of the technology used in the models and obviously, every user should use his personal intelligence and consideration in his kitchen lighting plan. Otherwise, just following the instruction given in some sites without judging their compatibility with your own kitchen will be wastage of time and money.

The under cabinet region of a kitchen is the most important part. It is the point of equilibrium considering the volume of workload as well as the focus of the beauty of the whole kitchen. A perfect under cabinet kitchen lighting not only attracts a visitor but it confirms a high intrinsic value of the house.

Naturally, I have spent maximum time in renovation of my kitchen and thought a lot about it from all sides. Before starting my layout, I have searched and familiarized myself with almost all new trends and technologies and acquainted with all pros and cons of several models of lights. Incidentally, I am not so much financially sound and it was, you could say, a must-do factor to research and avoid all unnecessary experimentation upon my kitchen. My kitchen is of a very small type of 400 sq. feet and here I will share my idea about the under cabinet lighting I used so far and pleased with the overall performance.

As my kitchen is small, I have removed all excess cabinets and just used two big cabinets left and right and two central small cabinets in between them and all are with glass doors. I preferred light green and black contrast all over the wall to keep my kitchen spacey in look. Cabinets are of a combination of navy blue and black with grey accented ridges.

Under the cabinets, I used recessed puck lights from Rite Lite (Model No. LPL626BX) 5 LED pivot and Swivel puck light 6 pack series. Those are all grey in color matched with my grey accent. These lights have long life span of 1,00, 000 hours, very tiny (3" diameter) , space saving and extremely energy saving too.

Secondly, it is very comfortable in changing the angle of the light as much as I need as it has a 360-degree swivel. Another interesting thing is, I can control the brightness of it just by pushing it. Single push for full brightness, twice to make it dimmed and a consecutive third to turn it off.
I used these puck lights with a combination of 27 SMD 24" Led strip light of 8 watt, (Model No. 2041WH) inside the cabinet to display my black dinnerware. That shows a very attractive contrast of my black dinnerware with the pale green backside wall of the cabinets. This Led strip consists of a set of 48 Led lamps of an overall consumption of 15 watt, very slim-lined and bright illumination. Easy to install, just by clipping on the surface. Here I should recommend another model of same advantage and that is Juno Lighting Pro-Series LED under cabinet fixture (Model No. UPL30-SL). I used these strips under the counter top that gives a very beautiful glow between the space of the counter top and the floor.

I am pleased with my work, at least I can say. Nobody yet criticized my design those have seen it.

I should conclude, that I am highly grateful to some sites of best kitchen lighting those helped me perfectly in researching on the lights under a small expense that I could afford and recommended my friends to take help of those sites.

LED Lights And Kitchen Lights

LED Lights And Kitchen Lights
When decorating and fitting a room, many people have a tendency to focus on the furnishings and the decor, but dont really think about fittings such as lighting. Lighting really makes a difference to how a room looks, and how you can use it.

In the operation of renovation and redecorating your home, choosing the right options for lighting is definitely a perfect final touch to the room's overall aesthetic. However, when deciding on which form to choose for its appearance, this does not mean that you have to compromise on practicality as Light Emitting Diode (LED) lights are not just good to look at, they also have an increased endurance than traditional forms of electric bulbs plus the usage of LED's can bring about considerable energy savings.

Although LED lighting has been around since the 1960's, it is only lately that it has been recognised as 'the next generation of electric brightness'. Regarded as accurate view of such appliances for a number of reasons. The advantages of using LEDs range from the realization they can be purchased in a large selection of colours and have a endurance four times that for fluorescent ones and twenty times that of halogen ones. LED lights are also not only suitable for interior usage, but can also be used in the garden or in fact anywhere outside (for which the long endurance is a large advantage).

The next generation of lighting generally seems to keep developing further as recent advances in LED technology in addition have resulted in much improved energy efficiency in comparison to other styles of bulb, with energy savings of 60% in comparison to compact fluorescent lights plus a staggering 90% in comparison with the halogen version.

The practical uses of LEDs are also several as such lighting can be effectively used around the home, such as in the kitchen. LED kitchen lights can be purchased in a selection of forms to fulfill any possible need, from 'button lights' (obtainable in white, blue and green), to strip lights as well as self-adhesive, colour-changing LED tape.

OSRAM SYLVANIA and Lowe's Launch Expanded Line of LED Bulbs

OSRAM SYLVANIA and Lowe's Launch Expanded Line of LED Bulbs    
On the heels of their introduction of one of the brightest LED A-line light bulbs, OSRAM SYLVANIA and Lowe's are now offering an expanded selection of SYLVANIA ULTRA LED light bulbs to consumers in all Lowe's stores nationwide and on Lowes.com, with additional products to arrive by July 2011.

The full line of SYLVANIA ULTRA LED light bulbs contains more than 16 new product offerings that are a fit for a variety of indoor and outdoor home applications. The line includes LED bulbs that match the color temperature of most incandescent bulbs and last up to 25 times longer.

"OSRAM SYLVANIA is proud to partner with Lowe's to bring new LED choices to consumers," said Phil Rioux, general manager of Consumer Lighting LED Retrofits at OSRAM SYLVANIA. "According to the 2010 SYLVANIA Socket Survey, 75 percent of Americans think color quality is important when choosing a light bulb, so we anticipate more consumers will choose LED lighting with an incandescent color for their homes as the phase out approaches."

Like the SYLVANIA ULTRA A-Line LED bulb, these new light bulbs exceed federal efficiency standards that will phase-out most inefficient incandescent bulbs, starting in 2012.

"Long-lasting, energy-efficient LED bulbs can help save consumers time, energy and money over the lifetime of the bulbs," said Mike Scott, Lowe's merchandising vice president. "With a complete selection of SYLVANIA ULTRA LED light bulbs available in store and at Lowes.com, we are pleased to provide consumers with new, energy-efficient lighting choices for every room in the home."

SYLVANIA ULTRA LED PAR Bulbs

The SYLVANIA ULTRA LED line includes popular directional reflector varieties such as PAR20, PAR30LN and PAR38 all of which are suitable for recessed ceiling or track lighting in the home, or for outdoor use on walkways (in UL approved outdoor fixtures). These PAR products use between 8 and 18 watts and can provide between $150-300 in savings over the life of the bulb (25,000 hours – 10x longer than a halogen model).  They also boast greater color definition with a choice of soft white (2700K) or white (3000K). The PAR20, PAR30 and PAR38 are dimmable and mercury-free.

2011年5月9日 星期一

Sirius Aurora LED Light Therapy System- reader reviewed and recommended

Sirius Aurora LED Light Therapy System- reader reviewed and recommended
It has certainly generated a lot of comments on TIA over the past two months, so I thought I’d share my experiences with the Sirius Aurora LED Light Therapy System with the community.  To say I was enthused by Marta’s initial post on the Aurora on March 3 is an understatement—I actually was the very first to comment (with the question, when will it be available on the TIA shop?).  So you can take that to mean either (1) this product really got my attention or (2) I seriously need to get a life.   Or both.

So when indeed the Aurora became available the following week, I promptly placed my order.   I loved the idea of LED and the fact that this product supported multiple light frequencies—and at an incredible price point.  My idea was to use it every night, alternating evenings between the red light to combat wrinkles and aging, and the green, to deal with skin tone and spots.  (I don’t have acne, though come summer I might give the blue light a try if I feel breakouts coming on.)  And I have been faithful to that plan:  it’s been almost seven weeks since I started this regime (46 evenings, actually) and I am either proud or embarrassed to say I’ve only skipped two nights.  (See above—as in, get a life.)  So that’s 23 sessions a piece with each mode.  The results have been positive, and in ways that have surprised me a bit as well.

By background, I’m 55, and acutely aware of everything that comes with that.  My face shows signs of aging and sagging, and I’m concerned especially about “marionette” lines, lines around the mouth, crow’s feet and under-eye crinkling, and most disturbingly a couple of horizontal lines that have taken up residency across the forehead.  I also have some freckling and hyperpigmentation spots.  I’m assured that none of this is particularly bad or pronounced for my age—but that is never a consolation, as TIA readers probably know.  And at another stage (and in another economy) I was a regular at the dermatologist’s office, and was very pleased the results of glycolic peels and microdermabrasion for pigmentation, wrinkles, and overall brightness and tone.  I got those treatments pretty consistently throughout my forties.  And about five years ago (I’m mentioning this thinking of Copley’s post on March 25 on pre-wedding treatments, which referred to this) I had two IPL sessions, which were extremely effective on pigmentation and dark spots.  All of that was fantastic, and probably kept some of the aging demons at bay, but all of it very expensive.

So I turned to the Aurora as an adjunct to what has become a diligent program of serums, creams, and cleansers from the TIA hit parade.  The first challenge was figuring out what to do with the thing—as several commenters have noted, Sirius doesn’t include instructions in the box, though they are pretty clear on the website.  Basically, each area to be treated gets three minutes of attention in the “pulse” mode, followed by three in the steady light mode.  The site instructs you to begin with three minutes of pulsed light on each of three face sections—segmented horizontally—and an additional three minutes apiece of continuous light on each of five areas (dividing the cheeks and forehead into two).  My plan was also to put the Aurora to use on my hands and neck/décolleté.

This turns out to be a big commitment; in the end I’ve been doing nine minutes on the face (in three sections) in pulse mode, and then 12 (not 15) in continuous mode—I found I couldn’t really address five separate different sections and settled on four.   Then three minutes pulse, three minutes steady, on the back of each hand, and on the neck.  A total of 39 minutes!  Generally I did this while watching the latest from the “Real Housewives,” which of course makes time fly, but it was a bit of a bore when squinting or closing my eyes whenever the device—which Marta points out has a rather large, oval-shaped working surface—was nearby.  (Which is a lot of the time, and raises the question debated in several reader comments about the use of goggles with the Aurora.   I have probably been less than prudent in exposing my eyes, particularly because I have used the green light directly on my eyelids, which have a couple of pronounced freckles.  It would be great if the TIA community could get some definitive guidance from Sirius about how to manage eye exposure).

In using the Aurora with the green light, I simply applied it to freshly-cleansed skin.  For the red light, I first slathered on a vitamin C serum or YBF antioxidants.  And in addition to the usual assortment of eye creams and moisturizers, I also used La Vie Celeste Glycolic mask about once a week, and the divine YBF Prep twice weekly.

And after all that – the results?  Better than I expected, if less than miraculous.   Use of the red light seems to have improved skin appearance and firmness, with some marginal, but real, impact on those wrinkles, especially around the eyes.  The surprise was the green light.  I can report definite and noticeable effects on the freckles and pigmentation.  The tops of my hands, in particular, are significantly improved.  A half-dozen big freckles have partially faded, and a constellation of lighter, larger splotches are now, depending on the light, nearly invisible.   On my face, the overall pigment is more consistent, a couple of freckles are less pronounced, and an area of discoloration I’ve had forever—sort of a light, dime-sized area near my jaw line—has faded noticeably.   In fact, when I saw a cousin (whose known me forever) a couple of weeks ago on the way to getting a haircut—without any makeup on at all—she actually commented on how even my skin tone appeared.  Without a leading question.

2011年5月3日 星期二

House Panel To Vote On Bills To Rework Consumer Bureau Powers

House Panel To Vote On Bills To Rework Consumer Bureau Powers
The political fight over the new U.S. Consumer Financial Protection Bureau will continue on Wednesday, with a Republican-led House subcommittee prepared to sign off on a trio of controversial bills that would scale back the agency's authority.

Republicans, who have promised vigorous oversight of the consumer bureau, could also use Wednesday's meeting to weigh in on growing expectations among banking industry officials and analysts in Washington that President Barack Obama will nominate White House adviser and vocal banking critic Elizabeth Warren to spearhead the agency.

Rep. Shelley Moore Capito (R., W.Va.), who leads the House Financial Services subpanel, has already made clear that she doesn't think Warren should be nominated for the post.

"First, I support a five-person commission. But, no, I do not believe nominating Warren is the direction the president should take," Capito said.

The three bills up for a subcomittee vote are backed by business groups such as the American Bankers Association but fiercely opposed by consumer advocates. The measures are unlikely to win Senate approval but could gain momentum a couple of years from now if Republicans gain greater control of Congress.

A bill introduced by House Financial Services Committee Chairman Spencer Bachus (R., Ala.) would replace the bureau's director position with a five- person, bipartisan panel.

Bachus has said he believes the bureau "will do a better job carrying out its mission if it is led by a bipartisan commission rather than a single director."

However, Senate Banking Committee Chairman Tim Johnson (D., S.D.) has signaled that he doesn't support the measure.

"This issue of a 5-member commission instead of a single director was already considered during the thorough Wall Street reform debate last year, and agreement was reached that consumers would be protected best with a strong and independent director in place at the CFPB," he said in a statement.

A second bill introduced by Rep. Sean Duffy (R., Wis.) would make it easier for a council of regulators known as the Financial Stability Oversight Council to veto the consumer bureau's actions.

The third bill would prevent the bureau from receiving key regulatory powers before the agency has a director in place. The bureau is on track to gain new consumer protection powers on its July 21 launch date. While banking officials and analysts anticipate that the White House will nominate Warren, the White House has not yet announced its pick and the top job remains vacant.

While the Senate is unlikely to back the proposals in the near-term, the bills could gain greater traction in years to come, analysts say.

"This should set the stage for action in 2013," MF Global Inc. analyst Jaret Seiberg said in a research note this week.

Capito said the bills are "commonsense measures to promote effective and efficient transparency and accountability" at the consumer bureau.

But consumer advocates and Warren, who is in charge of preparing the consumer protection agency for its July launch, have steadily criticized the legislative proposals.

"Many in Congress have made clear their intention to defund, delay, and defang the consumer agency before it can help one family," Warren said in a statement Tuesday. "These bills are about preventing the CFPB from operating effectively-- a dangerous game to play in light of recent lessons in the marketplace and how quickly financial threats to consumers emerge."

Similarly, consumer advocates are concerned that the bills will hurt the consumer agency's ability to protect consumers from fraudulent practices related to credit cards, mortgages and other financial products.

"If enacted, these bills will virtually guarantee the agency will be a weak and a timid one without the ability or the will to curb the kind of financial abuses that have caused the nation's worst financial crisis since the Great Depression and that are still harming tens of thousands of Americans throughout the country now," Consumer Federation of America Legislative Director Travis Plunkett said.

Taiwanese LED Company – FZLED - Going Global

Taiwanese LED Company – FZLED - Going Global
FZLED, a sub-division of the thermal and metal products manufacturer FZTech Inc., is announcing their plans to enter multiple international markets around the world and begin offering several lines of high-performance LED products to consumers. Receiving ISO-9001:2008 certification in November, 2010, FZLED is already turning heads with their innovative products like their newly released on/off switch dimming T8 LED Tube Lights. FZLED's newly designed website: http://www.FZLED.com.tw is now live to assist in providing product information and serving customers from around the globe.

FZTech Inc. was founded by three experienced R&D professionals and five metal manufacturers. The goal was to form a company to create and supply cutting edge, high-quality, reasonably priced, thermal and metal products for use in PC, LED, and consumer electronic product applications. Offering total metal and thermal solutions, FZTech provides its OEM services to various industry leading companies, including Advantech, Advansus, Avalue and Tranquil PC. With manufacturing of CPU coolers, DC fans, press fins, and several other product lines well-in-hand, FZTech Inc. decided to set-up FZLED as a sub-division to focus solely on developing superior LED products.

“We were making all the items needed to produce environmentally-friendly LED products. We wanted to use our know-how and expertise to help protect our world. All the pieces were in place and so we decided to go for it. We're committed to using technology to provide customers with green, high-quality LED lighting products.” says FZLED CEO Alan Lin. The FZ prefix came about through the company's commitment to designing products with exceptional cooling mechanisms. “Freezing” was shortened to “FZ.”

FZLED has committed itself to a three-pronged mission of producing High Quality, High Cost to Performance ratio, and extremely Energy-Efficient LED products. “We believe the customer comes first,” says FZLED CEO Alan Lin. “We strive, each and every one of us, at FZLED to design and manufacture the best and the greenest LED lighting solutions available. We don't want to be just another LED manufacturer. That is why we conduct everything, from R&D right up to assembly and shipment, ourselves, to ensure that each and every bulb that leaves our company is at its best. Our name, FZLED, only goes on products we believe in. We are a team of designers and assemblers and testers and shippers that give everything we've got to our customers,” Lin adds.

To date, FZLED has developed and manufactured several innovative torches/flashlights for the Taiwan, Japan and Singapore markets.

Already released products include FZLED's Bike Torch, Hiking Torch, and Waterproof Torch, as well as several others. FZLED has also developed and released a variety of high-power LED bulbs fitting E26, E27, B22 and GU10 sockets. FZLED is now looking to expand distribution into several other major markets around the world while continuing to release new and innovative LED lighting products that provide consumers with the best cost-performance ratio possible.

About FZLED
FZLED is a Taiwan-based developer and manufacturer of high-performance LED lighting products. As a sub-division of FZTech Inc., FZLED's products have superior mechanical and thermal designs, utilizing the expertise of FZTech. Committed to excellence, FZLED follows a strict TQC for the entire manufacturing process, and conducts R&D projects continuously in an effort to create LED lighting solutions that offer light-weight, high-quality, environmentally-friendly, innovative, and thermally-optimized products to consumers.

2011年4月26日 星期二

Picking LED Light Bulbs Based Upon Lighting Amoun

It can be hard to understand a new system, and as the brand new LED items make their own way into public fingers, it will be necessary to discover ways to see the product packaging. It may seem strange a brand new form of lighting might require fresh knowledge, yet despite having the particular increasingly accessible CFL light bulbs the situation is identical.

CFL manufacturers have circumvented the issue through putting the existing equal plainly upon the product packaging, which is why all of them say "60 Watt replacement" to make concerns easy. The newest method will require light bulbs to be listed together with lumens, not w.

What's a Lumen?

Lumens look at the final amount of packets of light produced by an easy source, the industry difficult means of stating simply how much mild a source puts out. We've grow to be accustomed to calculating light simply by watts. The typical incandescent bulbs simply put out about A dozen lumens for each w associated with electrical power they take in. On the other hand, LED bulbs produce concerning 60-100 lumens for every w.

Replacement Beliefs

Because LED light bulbs can produce a lot more lumens for each w of electrical power utilized, they are much more efficient. Realizing that doesn't help a lot when you are getting to the store and try to work out which light bulb to have when you need an upgraded.

A 40 watt bulb produces regarding 400-500 lumens. Any 60 watt light generates about Eight hundred lumens plus a One hundred watt light bulb generates 1400-1700 lumens, provide or even take.

Having the approximate number of lumens that to look will help you steer clear of getting house the wrong light bulbs. For example, when choosing bulbs to replace those who work in the chandelier which uses Twenty five watt bulbs, which usually coincidentally produce concerning 300 lumens, you wouldn't want to get 2.5w LED light because the form is correct : which light bulb just generates 4 lumens.

Knowing the variety of lumens is important to be able to acquiring the appropriate LED lights. Take a chart together with you just in case you come across lights which are only noticeable inside lumens, a coming pattern. Furthermore, research the the labels carefully - CFL bulbs packaged in the almost identical fashion to be able to LED lights, and also you shouldn't buying the incorrect point.

2011年4月14日 星期四

Ecosystems for Solid State Lighting 2011

 Ecosystems for Solid State Lighting 2011


IntertechPira is pleased to announce the dates for the 1st installment of Ecosystems for Solid State Lighting. The launch of this visionary event will take place November 30-December 2, 2011 at the Washington Marriott in Washington, DC . Chaired by Kathryn Conway from LED Consulting and Dr. Makarand Chipalkatti from OSRAM Sylvania, Ecosystems for Solid State Lighting 2011 will provide an intersection for big-picture "system thinkers" in the information and lighting industries to brainstorm and learn how really maximize the opportunities that solid state lighting (SSL) technology offers.

"Lighting touches so many different parts of design. We're just beginning to integrate new and existing technologies with all of the other components of a lighting ecosystem," said Dr. Chipalkatti.

"We envision Ecosystems for Solid State Lighting 2011 as a launch point for companies, government, clean energy advocates and others to collaborate. Together we can plan how to link SSL to smart electrical grids, advanced transport systems, social networking, surveillance and security, industrial efficiency, and other forward-thinking initiatives," added Kathryn M.Conway. "For this conference, we agree that it's time to get past simply replacing old light bulbs!"

Through approximately 18 expert presentations assessing market trends, technical development and application related advances, Ecosystems for Solid State Lighting 2011 will provide a new understanding of the diverse systems, their components and developing framework to achieve interoperability of devices and systems for SSL. The target audience includes advanced materials and systems manufacturers; computer systems, utilities, and information providers & facilitators; investors; architects and lighting designers, as well as policy-makers and government agencies and academics.

The conference will include one day of pre-conference seminars and workshops to allow for more in-depth coverage of issues and additional networking opportunities. Sponsorship and exhibition opportunities are available.

2011年4月11日 星期一

Montreal mayor fires comptroller in spying scheme

The mayor of Montreal has fired the city's comptroller and demanded his former right-hand man at city council resign over details of a spying scheme that now involves police.

But Claude Dauphin, the city council chairman and Lachine borough mayor says he won't step down and has done nothing wrong.

Dauphin was the target of an internal investigation led by city comptroller Pierre Reid, mayor Gérald Tremblay confirmed Monday at a news conference called after days of speculation.

The probe uncovered "troubling facts" including allegations involving Dauphin and a Lachine demolition company, Tremblay said.

Those findings are now in provincial police hands, and Dauphin should step down until an investigation is complete, the mayor urged.

Dauphin was supposed to chair a regularly-scheduled city council meeting Monday afternoon, after Tremblay's news conference.

Pierre Reid, the controversial comptroller who investigated Dauphin has also been removed from his job, but will remain a city employee.

Reid's methodology has come under fire in the past, namely for "spying" on auditor general Jacques Bergeron last year.

2011年4月1日 星期五

Dimmable PAR LED Bulbs offer energy consumption down to 7 W

 PAR-style high-power, high-efficacy lamps are available in PAR20 styles with energy consumption of 7 W, PAR30 units with 12 W consumption, and PAR38 bulbs that use 15 W. Edison medium screw-base and GU24 bi-pin base bulbs operate either in 120 Vac dimmable or in voltage input range of 90-290 Vac. Featuring 3,200°K warm-white led light, UL-listed units have CRI of 82 for optimal color and focused beam of 45°, which generates brightness from 333-762 lumens depending on model.

2011年3月30日 星期三

Finelite Introduces New Energy-Efficient LED Desk Lamp – Reach by Finelite

Finelite announces the second in a series of energy-efficient LED desk lamps – the Reach. The ENERGY STAR® qualified desk lamp is available now for anyone who wants more light for less cost.

Following in the footprints of first-generation lamp Curve, Reach offers the same award-winning technology but with an added twist – an adjustable arm lets you fine-tune your light with ease. Anyone with a workspace – commercial or residential - will love the flexibility to light your entire task area with a single desk lamp.

Efficient energy in a sleek design.

Like light bulbs, LEDs generate heat. Reach solves this thermal management problem with internal heat transfer pads and a head designed to radiate heat away from vital internal components, so you get enhanced light output and a long-term product life.

Plus, there are two stylish head designs to choose from: Viper has a triangular geometric shape, while Velo offers you a smooth, curved look. Whatever you choose, your Reach lamp will make a contemporary statement in any office.

2011年3月27日 星期日

Vermont towns turning to LED lights

LED lights, those darlings of environmentalists and the budget conscious, are hitting the streets.


The light-emitting diodes, which can use as much as 70 percent less energy as traditional lights, have been turning up regularly in car headlights, traffic signals, aviation lights and increasingly in home interior lighting.

GU10 LED Light bulbs 
GU10 LED Light bulbs




Now they're taking over street lighting in Vermont.


Waterbury is installing several dozen along Main and Stowe streets. They're in Winooski's city parking garage. A few have gone up in Burlington, and the city is toying with the idea of making LED streetlights far more widespread. Colchester has a Town Meeting Day ballot item that, if approved, would mean LED streetlights along all town roads.


Environmentalists love LED lights. They use so much less energy than traditional bulbs that their increased use could delay or even eliminate the need to build more electrical power plants, environmental experts and activists say. Many such plants spew carbon dioxide into the atmosphere, which scientists agree would hasten and worsen global warming.


Budget cutters embrace LED, too. The more than five dozen LED street lights are expected to save Waterbury about $3,000 year, said Waterbury Community Planner Steve Lotspeich. Colchester, too, would see savings from the LED lights and take advantage of a grant to pay for the cost of installing the new lights, said Colchester Public Works Director Bryan Osborne.