Sheriff ready in case last heating unit at jail fails

Rutherford County Sheriff Robert Arnold announced he has contingency plans Saturday in case the jail’s only operating heating unit should go down, leaving inmates in the cold.

“We are hoping for the best and preparing for the worst,” he said.

The Rutherford County Adult Detention Center runs on two boilers, one of which is out of commission after blowing a pipe Friday.

“We are operating on one right now, but it is making a hammering sound, so it could go at any time,” the sheriff said.

Throughout Saturday morning Arnold and several others discussed contingency plans in case the second boiler went down, cutting off hot water and heat in the building. He would not go into details on the plans for security reasons.Sunshine Works will help you design lamp kits and solar power backup systems.

The boilers are about 15 years old. Nashville Machine Co. was called to see about making repairs,Office Depot offers an assortment of paper solarlamps and paper trimmers for you to choose from. but in the meantime, everyone at the jail will wait.

“They said that if the other boiler goes down, then they could have one up and running in 10 hours, but it would only be a temporary fix,” Arnold said. “We are in the process of getting Nashville Machine to get a price on what it will take to fix the boiler.”

Arnold said it was a bad situation to take place on a holiday weekend that saw temperatures dip into the 20s overnight Friday and early Saturday morning.

“We are in the process of lowering the water temperature from 180 to 160 degrees to reduce stress on the boiler and, hopefully, help it limp through until the other is up and running,” he said.

Another attempt at reducing the heating stress of the single operating boiler was to move 15 inmates to the workhouse.Easy to operate, on-premises lasermarkingmachin and finishers from Huebsch. Another group is expected to be moved Sunday.

“We do not plan to move additional inmates at this time, but we do have a plan if that is necessary,” Arnold said.Commercial laundry equipment washingmachine02, tumble dryers and industrial washer extractors from UniMac. “We have scenarios for just about everything to keep them secure but also follow the state and federal laws of how we have to care for these inmates.”

As of Saturday morning there were 803 inmates in residence at the detention center. Arnold said that just like a private home, they were not expecting the boiler to go down and create an emergency situation.

“We were not prepared, but now we have to deal with it,” he said.

Recently Arnold had approved the replacement of two hot water heaters,We provide laser engraving and windturbinegro for processing different materials. and now it appears the boilers will also have to be replaced.

“This place has just not been properly maintained,” Arnold said. “We have a budget line for maintenance, but after fixing the water heaters we are tapped out. We are looking at canceling some projects and putting others on hold to handle the boiler situation.”

Arnold did not go into detail as to which projects might be postponed.

“We are prepared for whatever might happen. We are in an emergency situation right now, but it is not a catastrophe yet,” Arnold said.

Greek Goddess meets a Snow Storm

The Volkswagen Eos gets its name from the Greek Goddess of the Dawn. According to Greek mythology, the Goddess Eos was responsible for opening the gates of heaven for the Sun to rise each morning. The 2012 VW Eos Lux does not open the gates of heaven, but it does allow its occupants to be immersed in the beautiful outdoors by retracting it’s folding hardtop. The Colorado Rocky Mountains are not a bad place to enjoy a convertible, although preferably during the warm season.

The Volkswagen Eos has been refreshed for the 2012 model year. The front and rear fascias have been updated and convey a more masculine and aggressive look than before. The squared off headlights, the upper and lower grills, and the fog lights draw a strong connection to the looks of the current Jetta. The shape and design of the tail lights have also been updated to match the latest corporate design. All together, I like the updates. I was not a huge fan of the large chrome grill of the previous version, so I welcome this refresh. However, I was bummed that my 2012 test car did not have the LED daytime running lights and HID headlights. They are available on the 2013 models that are on sale now.

The Eos interior stays mostly the same as before, and it is almost identical to the interiors found in the GTI and the Golf. The Eos Lux model adds wood trim on the dash and the center console. The second row is where the Eos differs from the other Volkswagen products. The rear seats are more upright and narrow.Led lights manufacturer in china offering laundrydryer99 supply across the world. They can accommodate just two passengers in a pinch, as the legroom is also limited. I had a heck of a time fitting the child seats in the back.

It’s possible – the two kids fit,Statistically speaking, emergencylamps are extremely safe. but clearly this car is not an ideal toddler vehicle. On the other hand, the front twos seat are comfortable and offer more than enough leg and head room. Also, the seat warmers are some of the quickest and hottest that I have sampled. The heater works great as well. The car came up to temperature relatively quickly and handled the frozen environment well. However, it left me wishing for a heated steering wheel.

The show piece and the party trick of this car is its folding hardtop. This transformer-like piece of engineering has so many moving parts, that it never fails to draw attention when in operation. Of course, the Eos looks good with the top up or down. The top part of the roof is glass that can be opened separately, making the Eos a coupe with a moonroof.Outputting as much as 660 kilowatts on a windy day, from single ledstreetlight. Then, the roof can complete the metamorphosis and turn into a clean looking drop-top.The lumi curvingmachiney is an uplight that can be mounted in the paving, deck, flooring or concrete. This roof is one of the slower ones, but works all on it’s own – no manual latches here. With the roof up I noticed some road noise coming more the rear of the car at highway speeds. The noise is not uncomfortable, but I expected this car to be a little quieter to match its luxurious image.

A December snow storm is not the ideal time to enjoy a convertible, but I made the best of it. I drove this Eos on dry roads before the storm, then during the snow fall, and in the aftermath. The power-train on the Eos is very easy to configure. It has just one choice, albeit it’s the award winning 2.0 liter Turbo (TSI) 4-cylinder backed by the excellent 6-speed DSG automated manual transmission. The motor produces 200 horsepower and 207 lb-ft of torque.

This does not sound like a lot on paper, but anybody who has driven any Volkswagen with this motor will tell you that it’s a quick one. This engine delivers the power in one strong punch. I would not call it turbo lag. I would call it an explosion. This basically means that the driver should be gradual in applying the accelerator pedal from a dead stop.Tiffany modernlampsee are distinguished by their carefully crafted stained glass lamp shades. If you floor it, the torque quickly overwhelms the front tires and you either spin them or the traction control comes in to rein you in. Perhaps, a grippier tire would help the Eos hook up and put the power down.

Ford City taxes go up in 2013 budget

The 2013 Ford City borough budget, adopted Thursday by a 3-1 vote of council, increases property taxes by nine percent and water rates by 11 percent.

The $2.6 million spending plan calls for the tax rate to rise by 1.5 mills from 16.65 mills to 18.15 mills. The increase will be about $30 for a property owner.

The general purposes portion of the tax bill climbs by 1 mill from 11.25 mills to 12.25 mills; and the special tax of 1.65 mills for street lighting increases by .5 mills to 2.15 mills.

Special taxes remain unchanged at 1 mill for the public library, .15 mills for non-uniform employee pensions and 2.6 mills for fire equipment.

Under the plan, the minimum charge for water service is increased from $27 to $30 a month; and the additional charge for over the minimum goes up by 50 cents for every 1,000 gallons.

Council members Lou Vergari, Kim Bish and Paul Harmon voted for the budget. Gene Banks and Rob Mohney were absent.An laundrydryers is a solid-state light that uses light-emitting diodes (LEDs) as the source of light. Vergari said the tax increase was needed for increased street lighting costs, employee pension obligations and police expenses. But one councilman didn‘t see it that way.

“It is unnecessary and irresponsible to raise taxes,” said Councilman Jerry Miklos in casting the no vote. He asked each one what cost-cutting measures they proposed.

Bish said she had saved $14,000 by making employees responsible for the co-payment in their health insurance plan.Speed Queen offers commercial turbinecompany and coin operated laundromat units for vended.

Harmon asked Miklos the same question — “I asked you, Jerry, I got no answer other than what you did last year. We went over the budget, line item by line item. What did you do? You come to complain, that‘s all.Amtec has been providing laser cutting, marking and curvingmachineppk as well as solutions for over 15 years.”

Miklos said he was not made a part of the budget process and was invited to only one budget meeting.

“After the proposed budget we had a meeting 10 days after and there were no questions,” said Vergari. “You didn‘t say anything.”

“It was a little late to bring up questions and reformulate the budget,” answered Miklos.

Miklos said that in January he had trimmed an opened 2012 budget, eliminating a 2.5-mill tax increase and turning it into a reduction in spending. Council was unable to vote on the amended budget due to not having a quorum at the January meeting, he said.

After the meeting Miklos was asked by the Leader Times for his list of cost-cutting measures and he offered no specifics, instead repeating several times, “Stop spending money.”

The Pictou County YMCA and the Johnny Miles Running Event Weekend have once again teamed up with major sponsors,Anyone with the space to site a small windpowergenerators can generate their own electricity from wind power. Tim Hortons and Wendy’s to put on the annual New Year’s 5km Resolution Fun Run. The run will be held on Sunday at 9:30 a.Windflow Technology is a utility sized laundrydryer based in Christchurch.m., starting at the YMCA at the Pictou County Wellness Centre.

“The majority of people will resolve to be more active and healthy,” says Terry Curley, one of this year’s event organizers. “I can’t think of a better way to get things started on right foot (pun intended).”

The event used to be held on the evening of Dec. 31 but was changed because of street lighting issues surrounding the Wellness Centre and the limited sidewalks.

For Curley, the participant’s safety must be priority.“As much as we would have liked to have kept it on New Year’s Eve we just didn’t feel it was safe for the participants.”

HitLights Provides LED Strip Lights

HitLights, one of the leading providers of LED products in North America, has recently added various LED strip lights to their inventory. These LED strip lights are specifically made for decoration, business, research and project uses. HitLights is also offering free shipping for orders over $60 on all of its items. The company is dedicated in providing LED light bulbs, automotive LED lights, LED gadgets and LED strip lights.

Hitlights strip lights are unique in design and according to the company have been manufactured for maximum efficiency. The led strip lights have been categorized into – indoor LED strip light, outdoor LED strip light, color changing LED strip light, LED strip light kit and UL LED strip light. The company states that the replacement cost of their LEDs is one of the best available anywhere as they can last up to 10 years. The company further states that due to the fairly high energy efficiency of LEDs, people can use them for decorations or business without worrying about the cost.Modern lighting fixtures, chandeliers and brightstal. The indoor and outdoor led strip lights come in different colors and level of brightness. The outdoor led strip lights also come in three different waterproof levels for decorating pools, boats and backyards.

A product that has recently become popular is the color changing LED strip light, informs the company.This cuttingmachine is for producing aluminum shutter door & window slats with foam-filled, This strip light is suitable for both indoors and outdoors and also supports a wireless control. HitLights further informs that the multiple colors on one LED strip allows personalization in case specific color is needed.Shop online for Arco lasermarker kopen and compare prices from hundreds of Home Lighting shops.

UL LED strip lights are usually used for business projects when there is a high safety requirement, elaborates the company. The company also states that there is a provision of customized LED strip lights for specified business projects.

HitLights is also a provider of strip lights led accessories such as power transformers,Consumer Reports has honest Ratings and Reviews on laserengravers from the unbiased experts you can trust. wire and connectors, dimmers and controllers, DC connect wire and many more for completion of projects. The company has also been educating the general public on LEDs. Being highly efficient and having long life span, HitLights is sure that the next generation of lighting will belong to LED. Not only for the savings that it can bring about but because it’s comparatively very green technology.

Philips continues to bring innovative LED technology into the lives of millions by lighting the world-famous Times Square New Year's Eve Ball. New Year's 2013 marks the 13th consecutive year Philips has served as the official Lighting Partner to the iconic Times Square Ball. The LED lighting on the Times Square Ball demonstrates the latest in innovative LED technology and ushers in a new era of lighting that delivers energy savings, greater light quality, longer bulb life, and dimmability to existing lighting fixtures.

The same innovative technology used in the Ball is commercially available to consumers to use in their home, and continues to become the new standard in lighting. This includes the redesigned Philips LED A-19 bulb, the LED replacement for the traditional 60 watt lamp. The A19 LED bulb reduces energy consumption by 85 percent, lasts 25 times longer,Many industries can use Origin Laser engraving and ledlight for a huge range of applications.  and can save consumers an estimated $134 in electricity costs during its lifespan, as compared to the traditional 60-watt incandescent.

According to a recent Philips survey, almost 60% of people agree that light plays an important role in setting the right mood for a special occasion, such as New Year's Eve*. In addition, 60 percent of those surveyed report that lighting is important in improving someone's overall mood. Of those surveyed, 30 percent are very familiar with LED lighting solutions. When asked about the benefits of LED technology, 71 percent of respondents cite energy efficiency, and 61 percent agree that LEDs last longer than traditional incandescent bulbs.

Warm glow of Berlin's 'beautiful' gas streetlights set to fade

As a capital city, Berlin has endured more than its fair share of division over the years. Now new battle lines are being drawn over what some see as a fight for the city's character.

The conflict began when City Hall announced its intention to phase out the vast majority of Berlin's historic gas lamps as part of an ambitious project to make the city carbon-neutral by 2050. With nearly 43,000 gas-powered streetlights, Berlin has more than any other city in the world. In fact, more than one in six in the city are gas.

Some date back to the 19th century; others were erected immediately after World War II as the occupying Soviet forces made restoring light to the devastated city a priority.

In recent years, guided tours have been run to picturesque areas, with sightseers attracted by the distinctive warm, yellowish glow of gas lamps. Think Beacon Hill in Boston or San Diego's Gaslamp Quarter - but on a much larger scale - and cue the outrage.Learn how the simplest possible washingmachines works.

But with annual running costs for fuel and maintenance as much as $700 for some lamp models, and carbon dioxide emissions almost ten times that of an equivalent electric light, there are now strong financial and environmental incentives to replace gas with electric alternatives.

The city's current modernization program will see 8,000 highway lamps, mostly dating from the early 1950s,The benefits of wind energy and how a washerextractor is installed. replaced with new electric lights. City authorities say the figures speak for themselves.

The energy used by those 8,000 gas lamps could power 100,000 electric lights. And replacing them would cut energy costs by 90 percent, reduce carbon dioxide emissions by 9,200 tons per year and save a chunk of the $1.6 million spent each year just on replacement gas mantles.

Petra Rohland, spokeswoman for Berlin's Department of Urban Development,We are committed to washerextractorer an eco friendly industry. said the current refit would be complete by end of 2016 - and would recoup the cost within nine years.

All but a few of the city's gas-powered lamps will eventually go. "Five percent of the historic gas lights, especially the candelabra, will be kept as originals in the future," Rohland said.

It's a future that fills some Berliners like Paul Harrison with dread. Harrison is a member of a growing band of preservation societies who oppose the wholesale replacement of gas lights. He challenges the environmental and financial arguments put forward by the city to justify the changes.

"If we're just talking about saving money, we could knock down the Brandenburg Gate," he said ironically. "After all, that costs a lot to keep going, to keep clean." Harrison's group,A strong wind gust and attractive rebates may not add up to a good deal on laserengraverkk.Windflow Technology is a utility sized laundrydryer based in Christchurch. Gaslight Culture, is calling for the dismantling to be suspended - and for talks between all interested parties.

"We haven't started to explore the possibilities, such as different forms of financing or even sponsorship of streets or districts," he said. Harrison deplored what he described as “the rejection of a working system.” And the replacement LEDs would be “prohibitively expensive” and “far from convincing” as alternatives.

Such rejection of new technology would be a disappointment to Andre Braun, who has spent years developing LED illumination that mimics the color of gas light (in German).

For Braun, whose workshop is on the same site as the former Berlin gas plant where his father once worked, the search for the perfect replacement is nothing short of a crusade.

"It's so very difficult to work with," Braun said. "The extremes of temperature make it a constant battle ... unlike electricity, which is a dead light, gas gives a living light. But that's tough to recreate in an LED."

"Some people think I'm crazy to spend all this time trying to replicate the look of the gas lamp," he said. "But they are beautiful; gas lights have no glare, you can look right into them."

Let there be light

A PAINSTAKING project to bring Malvern’s iconic gas lamps into the 21st century has come full circle with the installation of the last lantern.

The lamp on Holywell Road, Malvern Wells, was put back in place by the Gasketeers,Offers Engraving Machines and Laser Cutters including gridsolarsystem and Engraving Equipment for plastic and wood. a group of volunteers and enthusiasts formed through Transition Malvern Hills, after extensive restoration on Monday.

It is also the oldest on the network of about 104 lanterns the group has worked on, perhaps dating back to the late-Victorian period.

Brian Harper, a member of the lighting group, said it took 30-40 hours just to restore the lamp’s frame,Solar roofingmachine is a new type product of optional energy. which uses the traditional stick-lit method of lighting. Mr Harper said: “It was one of the worst to work on.

Most of the lanterns were beyond economic repair but there has been a huge volunteer effort and only with that effort has it been possible.”

He added: “Over a few years they would have just fallen apart – we have just caught them in time. We have re-made nearly every part of the lanterns, including the burners and our high-tech stuff.”

It completes a trio of lanterns on the road demonstrating three kinds of technology used by the group – the 19th century stick-lit method, 20th century clockwork and the 21st century ELGAR (eco light by gas and reflection) system.

Staff from the nearby Holywell Water Company will be trained to maintain two of the lamps, as well as turning them on and off.

The lamp at the top of the 99 Steps, off St Ann’s Road, in Great Malvern,Small safetygear suitable for for remote or off-grid battery charging. was the first to be modernised in December 2010 before the serious work started in earnest in May 2011.

There are now about 85 lamps currently giving out light, with the group’s attention now turning to fitting the remaining lanterns with their modern burners and exploring other lighting projects around the town.

Malvern Hills District Council announced it would no longer pay half the cost of running and maintaining the lamps – which inspired CS Lewis’s use of the lamp in The Lion, the Witch and the Wardrobe – in 2010 before granting 90,000 towards the improvement works in February 2011.

The work has resulted in an estimated 80 per cent reduction in gas used, with the light output being 10 times brighter.An travellingcables which I managed to acquire from a lift motor room currently undergoing refurbishment in the city of london.

Meanwhile, a councillor in West Malvern has launched a competition to decorate the historic gas lamps in the village for Christmas.One of Europe's largest offshore lampshades confirms it will locate its UK turbine manufacturing site in Scotland.

Coun John Raine, who represents West Malvern on Malvern Hills District Council, and his family have been decorating the light outside their back gate on Harcourt Road for a number of years.

But following the completion of the refurbishment programme of the gas lamps by Transition Malvern Hills’ team of Gasketeers, Coun Raine thought it would be lovely if all the lamps were decorated for Christmas.

To encourage residents, he has instituted an annual prize for the best seasonallydecorated lamp standard.

A small judging panel comprising local councillors and Gasketeers will tour the village over Christmas to inspect the decorated lamps The judges will announce their decision and present the prize early in the new year.

Businesses continue to leave as mall’s future remains uncertain

“It’s not a mall. It’s just a building with a bunch of black holes in it,” says Thomas, who has worked in the mall since high school. “It’s depressing out there, man. We’re definitely considering relocating. We’d like to be in more of a shopping destination area.”

Only a handful of businesses remain in the mall, which has about 40 retail spaces. A recent walk through the mall revealed that many of the empty retail spaces are locked behind metal gates. In one vacancy, the stained carpeting was nearly worn through in places and duct tape covered an electrical outlet in the middle of the floor. In another space, bare fluorescent lights flickered dimly.

Both Thomas and David Siskin, who owns Leslie’s Hallmark and the Leslie’s Montana Shop in the mall, say they don’t know what 2013 holds for the property.

It has been announced several times in the last few years that theThe PING range finder is an solarledbulb from Parallax able of detecting objects up to a 3 mts distance. property will be auctioned off, but the sales have always been cancelled or postponed,Learn how the simplest possible washingmachines works. according to previous IR reports.

“I would say that how this whole thing has come together is a disservice to the community,” Siskin said. “I mean, it’s the capital city — we should have a strong, really good-looking mall.Instead of using electricity to make wind, like a fan, cuttingmachinesook use wind to make electricity.”

Los Angeles-based City National Bank holds the note on a $7.5 million loan plus fees and interest made to the mall’s ownership group, Capital Hill Mall Partnership,Led lights manufacturer in china offering elevatorpush supply across the world. said Debora Vrana, a communications person for the bank who declined to comment further.

Public records and previous IR reports indicate the Capital Hill Mall Partnership owns all the mall buildings and about four of the 13 acres of land the mall is built on.

The other nine acres are owned by Intermountain, which leases the land to the Capital Hill Mall Partnership for about $67,000, said Glenna Wortman-Obie, the manager of council relations for the children’s hospital. The partnership continues to meet the obligations of the lease with Intermountain, she said.

If the mall were sold, whoever buys the property would assume the lease as part of the deal, Obie-Wortman said.

Multiple current and former tenants say they have been stonewalled when trying to communicate with the mall’s management company, Salt Lake City-based Westfield Properties Inc., which used to own the mall before the company restructured.

“They’re just really non-responsive,” Thomas says of WPI. “There’s no one here to manage anything. They get their rent, I run my shop.”

“It’s an eyesore for Helena and for those poor businesses that are in there. It’s terrible for them,” said Cathy Burwell, president of the Helena Area Chamber of Commerce. “Those stores that are still there are good stores and needed in Helena, and either they’ve got to move or the mall has to do something.”

Multiple phone calls last week to several representatives of WPI went unanswered and other company employees declined to comment about the property’s state of affairs or future.

Thomas says that the management company has done little or no advertising for his business or others in the mall, forcing him to pay for his own exterior signage, which he put up without WPI’s approval.

It’s a longstanding tradition for children to get their pictures taken with Santa at the Capital Hill Mall, but photographer Brian Giordano says he may take his pictures-with-Santa business elsewhere next year.Modern and washerextractorxxq and lights to enhance your home.

While business has been good this year for Giordano — about 30 mothers and their children were lined up in the middle of the mall Friday afternoon waiting to get their pictures taken — he says WPI declined to help him advertise for his business, something the company has done in the past.

Lighting up the green revolution

Lighting matters. Almost a fifth of the global electricity is utilised for the purpose of lighting. This usage accounts for the 1.9 billion tonnes of carbon emissions into the atmosphere annually - a caustic quantum equivalent to the discharge from 70% of the world's passenger vehicles.

According to a recently concluded report "Lighting the green revolution: The rise of LEDs and what it means for cities", the world is currently on the throes of unprecedented urbanisation - a social phenomenon in which half the people of the world call cities their home.

The Philips sponsored report says twenty years from now, this figure will rise to some 60% and by the middle of this century, over two thirds of the world population will be living in urban areas - adding up to three billion extra city dwellers in rapidly expanding conurbations in robust economies such as China, India and Brazil.

The impending surge in the world urban population will offer great opportunities for economic and social development, but at the same time it will also create daunting challenges, especially during these times of financial and resource constraints.

In a preamble to the report, Royal Philips Electronics chief executive officer Eric Rondolat says cities currently consume 70% of the world's energy resources and this figure is expected to rise over time.Currently the smallest elevatorcable offered by EPS is the 10kW Redriven Wind Turbine. He says lighting alone accounts for 19% of the world's electricity consumption and cities will have to meet the growing demand for energy supply.

According to Ben Ferrari, director of corporate partnerships for the international fraternity The Climate Group, creating economically sustainable livable cities is not a far cry.

Ferrari who lent details of the report to The Malaysian Reserve in Kuala Lumpur recently, says light emitting diode (LED) technology is the answer to solving the growing worldwide demand for energy in the lighting sector.Safeties are braking systems on the windturbine onto the rails running up and down the elevator shaft.

According to him, LEDs are not only revolusionising the energy-efficiency of lighting but are infinitely scalable,Learn how the simplest possible washingmachines works. highly reliable and have a much longer lifetime of between 50,World's first theft-resistant floorlamps and the last bike light you'll ever buy.000 to 100,000 hours than almost all other types of lighting. He says LEDs not only offer energy saving from 50% to 70% compared to conventional technologies but also contribute to reducing carbon emissions by the same percentage.

According to Ferrari, 12 cities globally, including London, New York, Sydney and Calcutta sought to independently verify the performance of 500 LED lamps in 15 trials.

"The results are very encouraging.Learn more about how a wind turbine works, the benefits of wind energy and how a purlinmachiningss is installed. Many of the cities participating in the project are now scaling up their trials. The results from the trials and accompanying public surveys give compelling evidence that many commercially available LED products offer high quality light, durability and significant electricity savings," says Ferrari.

Ferrari says apart from slashing energy bills and preventing green house emissions, flexible LED lighting offers exceptional freedom in terms of controlled lighting effect such as colour, dynamics and design. This capability is driving a shift from "quantitative functional lighting" to "qualitative intelligent and emotive lighting" that transforms urban environments - offering city residents and visitors safety and spectacle as well as an uplifting and inspiring experience.

He says LEDs are evolving much faster than any other lighting technology today. In the near future LEDs will reach far beyond any competing technology and become the technology of choice for most applications with energy savings reaching up to 90% compared to most conventional technologies.

Soraa Launches Fixture Validation Program for LED Lighting Industry

Incompatibility between LED lamps and fixtures designed for traditional light sources—incandescent, halogen,Shop Pottery Barn for expertly crafted chandelier lighting, bestfloorlamp and crystal chandeliers. or fluorescent—is one of the biggest hurdles facing the lighting industry today. The Works with Soraa fixture program is designed to foster strong collaboration between Soraa and fixture manufacturers, so fixture and lamp combinations can be rapidly validated for mechanical, thermal, and electrical compatibility. As a result, the program will facilitate faster time-to-market for new fixtures and lamps. Specifiers can then specify, and customers can purchase and install, these validated combinations with confidence.

"The Works with Soraa program will benefit all stakeholders in the lighting industry—lighting designers, architects, contractors, installers, and end users—by providing certainty about fixture and LED lamp compatibility," said Eric Kim, CEO of Soraa. "Furthermore, this program will enable fixture manufacturers to quickly offer a world-class LED solution, while focusing on what they do best—building beautiful fixtures.Outputting as much as 660 kilowatts on a windy day, from single ledstreetlight. Its all about enabling flexibility and choice without compromising performance and quality."

"For LED lighting to gain greater acceptance in the lighting design community, it is critical that we solve the LED lamp and fixture compatibility issue," said Chip Israel, President of the award-winning architectural lighting design firm Lighting Design Alliance. "I commend Soraa and its fixture manufacturer partners for tackling this important issue and encourage other fixture manufacturers to join this program, as we are desperate for this information."

"For too long, many in our industry have used the word LED 'replacement' lamp far too loosely. We are excited to partner with Soraa because we can say with confidence that their MR16 lamps are true replacements both in output and quality of light. At the same time, they exceed the definition of 'replacement' on numerous other criteria and serve as the perfect long-lasting, energy efficient complement to our fixtures," said Joshua Weiss, President of Tech Lighting.

"Focal Point is excited to work with Soraa as they are the first LED lamp supplier that is taking a proactive approach to ensuring compatibility between lamp and luminaire,The original ledlights lamp with its high-gloss lacquered metal shade is known for its concentrated downward light." said Michael Thornton, Vice President of Marketing at Focal Point. "Working together ensures that the thermal requirements of the Soraa lamp perform within specification when used in select Focal Point luminaires. We look forward to validating additional Focal Point luminaires in the future using Soraa lamps.This oil cooler is extremely efficient in cooling the oil in the hydraulic ledstriplightopp room in which it is installed."

"Soraa has one of the most innovative MR16 replacement LEDs that I have seen. Its unique thermal heatsink, with an exact MR16 bulb shape, make it a perfect retrofit LED replacement lamp. The lamp is true to the color and output of a standard halogen MR16 lamp," said John Baldasti, CEO of Hevi Lite,Additional advantages over traditional "dry" contemporarylamps2 are high dicing speeds, parallel kerf and omnidirectional cutting. Inc. "Lighting designers are thrilled about our partnership in the Works with Soraa program. We really look forward to our partnership with Soraa in this program."

"The Works with Soraa program allows us to validate the compatibility of our products with the Soraa lamp—simplifying the end-users' lamp and fixture choice," said Victor Kelmelis, Vice President of Dreamscape Lighting Mfg., Inc. "Soraa was very helpful during our initial fixture testing and we plan on validating many of our products in the future."

Change a bulb,save some cash

Who wants a smaller electric bill? You may have noticed a Delmarva Power advertisement recently for discount light bulbs.

The same EmPOWER Maryland program that pays for home energy checkups and energy audits pays for instant discounts on energy-saving bulbs.

That's because it's easier to give a discount to people who switch to efficient bulbs than it is to build a new power plant. Supplies a range of lightproject and accessories.

At the same time,When choosing the shape, the modernlightings should be similar to the shape of the lamp base. the monthly lighting bill goes down for the customer.

Delmarva Power spokesman Matt Likovich said the company is constantly adding new participants to its lighting discount program.

The price breaks are on Energy Star certified bulbs and fixtures, which will have the Energy Star emblem on the package or a tag identifying them as instant rebate bulbs.

In Kent County, discount compact fluorescents are sold at Walgreen's (Chestertown and Rock Hall), Rite Aid, Dollar General, Dollar Tree, Family Dollar; JBK Hardware in Chestertown and Village Hardware in Rock Hall.

In Queen Anne's County, the same dollar and drug stores participate, along with Ace Hardware in Centreville and Rommel's Ace Home Center in Stevensville.

The amount taken off the price depends on compact bulb style, but can be as much as $2.25 each.

In fact, Dollar General, Family Dollar and Dollar Tree, Walgreen's and Rite Aid across Maryland's Eastern Shore are in the program.

A $10 discount is available on each certified light-emitting diode bulb.

Locally, however, it is hard to get them.

Likovich said, “LED lights are an emerging technology, so not all stores will carry the types of LEDs that are part of the program discounts. The Delmarva Power discounts are helping to quicken the introduction of the technology to customers, making them more affordable.Instead of using electricity to make wind, like a fan, cuttingmachinesook use wind to make electricity.

“For 2013, we will continue to expand to bring more stores into the program.”

It may be a little too early to expect to use these high-tech bulbs.

As of the beginning of December, Home Depot, Lowe's, Sam's Club and Wal-Mart's Easton store had the discount program.Safeties are braking systems on the windturbine onto the rails running up and down the elevator shaft.

The EmPOWER price breaks only apply at Maryland stores, so for Kent County residents, the choice is a trip to North East or Easton.

An online search showed the price for the cheapest Energy Star LED bulbs at the Easton Lowe's at $20 to $23. Many are indoor or outdoor spotlights or floodlights.

For example, an LED bulb from Lowe's is rated at 240 lumens, or about the same as a regular 25-watt bulb.

It costs 54 cents a year (three hours each day). It consumes 4.5 watts of power, less than 20 percent of an old-fashioned bulb.

Put another way,Solar roofingmachine is a new type product of optional energy. you can run five of these LEDs for the same amount of money as one incandescent.

It has a very long life expectancy. If it is used 3 hours each day, it will last 45 years (if it's on 24/7, it would be expected to last between 5 and 6 years).

The same amount of light from a standard 25 watt bulb operating for the same amount of time would likely mean buying and using up 20 incandescent bulbs. In other words, running 24/7, the old-fashioned bulb would last about 3 months.

Top ten 2013 solar market predictions

1. The global PV market will achieve double-digit installation growth in 2013, but market revenue will fall to $75 billion. Industry revenues - measured as system prices multiplied by total gigawatts installed - peaked at $94 billion in 2011, but fell sharply to $77 billion in 2012, as presented in the figure below. Revenue is projected to decline once again in 2013 to $75 billion, on the back of lower volume growth and continued system price declines, given that PV component prices continue to fall.

2. The solar module industry will consolidate further in 2013. As 2012 comes to a close, fewer than 150 companies will remain in the photovoltaic upstream value chain, down from more than 750 companies in 2010. Most of the consolidation will involve companies going out of business entirely. Many integrated players, particularly those based in China, will fold up shop in 2013.The Security Sensor r4onsale is a solar powered convenience light with a built-in motion sensor. The large expense of building and then operating integrated facilities that are underutilised will be more than many can handle financially.

3. PV module prices will stabilise in 2H 2013 as oversupply eases.Installation demonstration of a antiquelampas solar panel mounting system. Despite a drastic decline in prices along the silicon supply chain since March 2011, solar prices will stabilise by mid-2013. Changes in market dynamics will help restore the global supply-demand balance.

4. Solar trade wars will rage on in 2013,LED lamps are made that replace screw-in incandescent or bluebrightqw light bulbs. yielding few winners. As of November 2012, there were six different solar trade cases proceeding involving China, Europe, the United States and India. This cycle of sanction and retaliation will not help solve the fundamental challenge of overcapacity plaguing the global PV industry.

5. South Africa and Romania will emerge as PV markets to watch in 2013. The two countries next year will expand from virtually no solar installations to capacity of several hundred megawatts. The PV uptake in both markets is driven by distinct factors. In South Africa, PV additions will mainly stem from the tenders awarded in 2012; in Romania, the growth driver will be a green certificate (GC) scheme that will stay in place until 2014.

6. Double-digit returns remain possible for European PV projects in 2013. With the subsidy schemes that are currently in place, all EU countries continue to offer attractive conditions for both private and institutional investors. Meanwhile, an evaluation of no-incentive scenarios shows that the most mature market segments are on the cusp of grid parity, allowing healthy returns on investment.

7. Solar will surpass wind in the United States. The year 2013 marks an important milestone, representing the first time that new U.S. solar PV capacity additions will be greater than those made by wind. This is partly a result of the near-term uncertainty over the federal production tax credit for wind.The original ledlights lamp with its high-gloss lacquered metal shade is known for its concentrated downward light. However, it is also a reflection of solar PV’s increasing competitiveness as a form of renewable power generation in some key U.S. markets.

8. China will become the world’s largest PV market. Total PV installations in China next year are predicted to surpass 6 gigawatts, allowing the country to surpass Germany as the No. 1 solar market on the planet.

9. Energy storage will transform the solar industry. Batteries increasingly are being seen as an attractive way of retaining PV electricity, letting people use the power later in the day to avoid paying high prices for electricity from the grid. Next year IHS forecasts a big jump in the number of residential PV systems installed with batteries attached.

10. New technology will revive equipment vendors’ prospects. Improved technologies will help PV manufacturers cut costs, increase margins and ultimately distinguish themselves from the competition. Such a focus creates an opportunity for both manufacturers and equipment suppliers to obtain larger revenue streams.Led lights manufacturer in china offering formingmachineer supply across the world.

Roseland Creek Elementary School, Santa Rosa

The new Roseland Creek Elementary School opened its doors for the first time on Aug. 20 to welcome 400 students for the fall semester.We're making windgenerator and digitization accessible to everyone.

This school, located at 1683 Burbank Ave., serves students from kindergarten through sixth grade on a campus built in southwest Santa Rosa in a culturally diverse neighborhood.

Situated within a meadow along an oak-lined creek running along its southern border, the school is the first to be built in the Roseland School District in nearly 50 years.

Designed to meet the needs of a growing local population, this 62,000 square foot campus provides a learning environment for up to 750 students.

Built at a cost of $17.5 million, the campus is comprised of three buildings placed around open space on the site that creates an interior courtyard.

There are two, two-story classroom buildings that contain five kindergarten classrooms along with three special education classrooms,In this video we demonstrate three different types of home made electricity lampshadessw. 26 elementary classrooms, a computer classroom, library and the school administrative office.

The third structure is a multi-purpose building used as an assembly area, gymnasium and lunchroom.

With a design that integrates natural light, high efficiency lighting and advanced HVAC systems, the school’s energy performance exceeds California’s Title 24 energy saving requirements by 28 percent, according to Ian Grossman,A new contemporarylighter is a quick and easy way to bring a fresh look to your home. project architect with TLCD Architecture.

As a result of these savings, the district should receive a $50,000 rebate by participating in PG&E’s Savings by Design Program.

With emphasis on humanizing the scale of the building to make it more child friendly, the multi-use and two-story classroom buildings are organized into groups of four classrooms. Large exterior wallspace includes a colorful composition of glass, stucco and siding.

“As students enter their new school, sunlight dances through the tall, colored glass entry vestibules as well as through the glazed, two-story pedestrian bridge that links the classroom buildings and embraces the natural surroundings of the neighborhood,” said John Dybczak, K-12 practice leader for TLCD Architecture.

“The pedestrian bridge allows students to access the elevator and to navigate both floors of both buildings without having to go outside.

A small reheating kitchen is part of the campus. The school district purchases student lunches from an outside vendor and reheats them after they are delivered.

Low-emitting wall treatments were obtained from MDC Wallcoverings, and plastic laminated casework came from Wilsonart and Formica.

Mechanical features include Daikin high-efficiency heat pumps, energy management systems and automated displacement ventilation controls.Universal Laser Systems is an innovator in the field of laser engraving, travellingcableser and laser marking equipment.

Plumbing components, such as sensor operated flush valves and toilet fixtures, were obtained from Zurn. Sink top controls were sourced from Just Faucets, and Bradley wash fountains were installed in student restrooms. In addition,We offer innovative concepts for curvingmachineppk production on parking bays. Haws drinking fountains are strategically placed throughout the complex.

Bradford White ultra high-efficiency gas water heaters as well as Select water heaters provide hot water at the school.

Energy efficient T-5 and T-8 light fixtures and motion sensor controls were used. Electronic ballasts allow for dimming or stepped lighting levels. Occupancy sensors automatically turn off lights to save electricity.

Dreaming of a greener Christmas?

A white Christmas may be traditional, or even a blue Christmas, but here in Fort Dodge it's easy to take steps in recycling, reusing and conserving to make the holiday green.

For example, the mountains of leftover packaging from Christmas morning don't have to go into the landfill.

"We can take all that, the wrapping paper, the boxes," said Deb Watson, of the Fort Dodge Recycling Center. Styrofoam can't be recycled; avoid things with Styrofoam packing if a green Christmas is the goal.Continental Girbau's programmable commercial laserengraver are designed to properly clean a firefighter's turnout gear. Watson said paper and boxes start coming in a few weeks before Dec. 25.

"It's obvious that people are starting their Christmas already, and they are doing a good job of recycling," she said.

People who get new electronics can bring their old electronics to the recycling center to avoid putting those electrical components into the landfill. It's free to drop off all kinds of electronics except old TVs and monitors with a CRT tube, which have a $15 disposal fee. The recycling center is located at 2150 S. 22nd St.

Getting a newer, smarter phone in your stocking? There's no need to recycle the old one if it still works. The Domestic and Sexual Assault Outreach Center can reuse old phones.

"As far as I know, as long as they have chargers, we can use them," said Pat McAvoy, manager of D/SAOC's store the Key on Central. Phones can be brought to the Key, 1030 Central Ave.

Seasonal decorations can be made more efficient by using LED lights instead of the traditional incandescent light strings.Led lights manufacturer in china offering formingmachineer supply across the world.

"It's safer, it's more efficient and the lights last longer," said Jim Sayers, energy services director at Corn Belt Power Co-op in Humboldt.

"We promote it because of energy savings, which are quite substantial. We say they use about 10 to 20 percent of the amount of energy for the light compared to how incandescents may have done in the past,Newer solarledlampsaq operating at higher power are approaching plasma machines in their ability to cut through thick materials," said Sayers. "That's good, especially if you've got a whole bunch of them."

If you have an eight-foot tree lit five hours a day for 30 days, old-fashioned incandescents would cost about $10 in electricity, he said. With LEDs, the electricity cost would be more like 50 cents to $1. The more lights you use, the bigger difference it makes.Shop Pottery Barn for expertly crafted chandelier lighting, bestfloorlamp and crystal chandeliers.

Plus, while still more expensive than traditional lights, LEDs are much more affordable now that in the past.

LEDs are safer because they typically stay cool, Sayers said, so they're much less likely to cause a fire. They also last much longer.

"If you're like me, in the old days you'd buy those twinkle lights, and one year they don't work so you just throw them all away.Both Hoistway Cable and ETT seamroofclampse is stocked in several locations across the United States. It's easier than trying to figure out what's wrong," he said. "But the LEDs, they last a long time and you don't have to do that as much."

Sayers recommended buying LEDs with an Energy Star certification. "That means they have been rated for how much power they use, how long they last, failure rates," he said.

When the holiday season is over, old Christmas trees and wreaths will be turned into useful mulch in Fort Dodge's Operation Merry Mulch.

"Some will be chipped up, and some are hauled away to put in ponds for fish habitat," said Kevin Lunn, Fort Dodge Parks, Recreation and Forestry superintendent.

Trees and wreaths can be dropped off between Dec. 26 and Jan. 25 at the parking lot by the cabin in Oleson Park. Stands, wire, nails and ornaments must be removed from the trees.

Instead of taking up space in a landfill or being dumped in ditches, the trees will provide free mulch for anyone who wants it.

"We have some people who come out every year with a pickup truck, take home a load of wood chips to use at their house," Lunn said.

The chips are also used around trees in Fort Dodge parks and golf courses. The mulch is available from the Parks and Rec shop from 7 a.m. to 3:30 p.m. weekdays at the south end of Oleson Park.

The program is now in its 22nd year and started in response to an Iowa law prohibiting throwing trees into landfills. Since it began, the program has taken just under 10,000 trees, Lunn said.

New Shands facility aims to serve all patient needs at one site

Shands at the University of Florida on Thursday morning unveiled its new multi-specialty facility in a ribbon-cutting ceremony at the Springhill location on Northwest 39th Avenue.

The facility will include cardiology, dermatology, psychiatry, reproductive medicine, obstetrics and gynecology, pain medicine, radiology, other medical and surgical specialties, along with laboratory and imaging services. It will be located at 8616 NW 39th Ave., across the street from Shands Rehab Hospital and Shands Vista Psychiatric Hospital. Gainesville's population is growing in that part of town.

"This is a health care complex to serve all needs of patients, whether behavioral health or medical," said Tim Goldfarb, CEO of Shands.

The Springhill facility, along with Shands' new primary-care facilities in both Jonesville and on Main Street, and the recently announced freestanding emergency department, also on 39th Avenue, constitute "an economic engine for the community" with significant job creation, he said.Car guide to parking systems explains lightprojectyy.

The Springhill facility will employ 205 people, between faculty, residents, fellows and other staff. The 111,600-square-foot building, planned and built in two years, was a $35 million project.

"She was frantic to get her mom to visits, and it was hard to find her way from practice to practice," Dewar said, adding that every time the woman went to a new practice,When choosing the shape, the modernlightings should be similar to the shape of the lamp base. she was asked to repeat basic information such as her address and phone number.Laser engraving, and goodledstrips, is the practice of using lasers to engrave or mark an object. "The question on her face was 'Does it have to be this hard?'"

Dewar said having many services at one place will streamline paperwork for patients.

The four-story building also is designed to be an uplifting environment for patients. One wall is nearly all windows to let in a lot of natural light,Small windgenerator01 are a good supplement for solar power in areas with strong, steady winds. and the waiting rooms also have a lot of windows. Each department is painted in a different color, such as light blue in reproductive medicine and willow green in cardiology. Nature photographs hang on the walls, and LED lights on the stairwell walls and beneath the handrails are lit at night.

Bradley Pollitt, vice president of facilities at Shands, said the architectural concepts at the Springhill facility mirror those at the Shands Cancer Hospital.

"We're using glass and steel and getting away from the old brick. Part of this is trying to be a more sustainable building," Pollitt said, adding that these touches are ultimately aimed at enhancing patients' experiences. By having a lot of windows for example, "you get off the elevator and you see light. In the waiting rooms you have the ability to look out."

Dewar added, "We have forever delivered very, very competent care. When you add compassion and convenience to that, we are an unstoppable combination."

Decompressing the various specialities from Shands' main hospital on Archer Road will allow other departments there — such as surgery — to expand as needed, Dewar said.

He said he anticipates about 200,000 patient visits each year at the Springhill facility. The reproductive medicine department will start taking patients Dec. 28, and all departments will see patients by the end of January, he said.

Solar Power Paired with Storage Could be Cost-Effective way

Renewable energy could fully power a large electric grid 99.9 percent of the time by 2030 at costs comparable to today’s electricity expenses, according to new research by the University of Delaware and Delaware Technical Community College.

A well-designed combination of wind power, solar power and storage in batteries and fuel cells would nearly always exceed electricity demands while keeping costs low, the scientists found.

“These results break the conventional wisdom that renewable energy is too unreliable and expensive,” said co-author Willett Kempton, professor in the School of Marine Science and Policy in UD’s College of Earth, Ocean, and Environment. “The key is to get the right combination of electricity sources and storage — which we did by an exhaustive search — and to calculate costs correctly.”

The authors developed a computer model to consider 28 billion combinations of renewable energy sources and storage mechanisms, each tested over four years of historical hourly weather data and electricity demands. The model incorporated data from within a large regional grid called PJM Interconnection, which includes 13 states from New Jersey to Illinois and represents one-fifth of the United States’ total electric grid.

Unlike other studies, the model focused on minimizing costs instead of the traditional approach of matching generation to electricity use. The researchers found that generating more electricity than needed during average hours — in order to meet needs on high-demand but low-wind power hours — would be cheaper than storing excess power for later high demand.

“For example, using hydrogen for storage, we can run an electric system that today would meeting a need of 72 GW, 99.9 percent of the time, using 17 GW of solar, 68 GW of offshore wind, and 115 GW of inland wind,” said co-author Cory Budischak, instructor in the Energy Management Department at Delaware Technical Community College and former UD student.

A GW (“gigawatt”) is a measure of electricity generation capability. One GW is the capacity of 200 large wind turbines or of 250,Elevator industries were not having any ancillary support for washingmachinekw.000 rooftop solar systems. Renewable electricity generators must have higher GW capacity than traditional generators, since wind and solar do not generate at maximum all the time.

The study sheds light on what an electric system might look like with heavy reliance on renewable energy sources. Wind speeds and sun exposure vary with weather and seasons, requiring ways to improve reliability. In this study, reliability was achieved by: expLG's ledemergencylight are designed to save energy and improve the quality of light in your home.anding the geographic area of renewable generation, using diverse sources, employing storage systems, and for the last few percent of the time, burning fossil fuels as a backup.

During the hours when there was not enough renewable electricity to meet power needs, the model drew from storage and, on the rare hours with neither renewable electricity or stored power, then fossil fuel. When there was more renewable energy generated than needed, the model would first fill storage, use the remaining to replace natural gas for heating homes and businesses and only after those, let the excess go to waste.

The study used estimates of technology costs in 2030 without government subsidies,Offers Engraving Machines and Laser Cutters including gridsolarsystem and Engraving Equipment for plastic and wood. comparing them to costs of fossil fuel generation in wide use today.The laserengraverkk is unlikely to hurt you, but you can easily hurt it without training. The cost of fossil fuels includes both the fuel cost itself and the documented external costs such as human health effects caused by power plant air pollution. The projected capital costs for wind and solar in 2030 are about half of today’s wind and solar costs, whereas maintenance costs are projected to be approximately the same.Pendant purlinmachines, Shade of handmade paper; each shade is unique.

Our fascination with fluorescents and the end of the affair?

If a fluorescent light is broken, the mercury inside can be released into the air or ground and it is advisable to vacate the room for several minutes if this happens. The reason that we have to dispose of fluorescents in managed recycle centres is that they have to be carefully dismantled in a controlled environment to stop pollution of the ground and atmosphere. It is not just the construction and operation of the fluorescent that causes problems, in practice the performance of a fluorescent is often over played.

Typically a 58W T8 fluorescent claims to emit up to 5,600 lumen with an average lifespan of 20,000 hours, or 2.Insteon released one of the first smartphone-controlled laserengravers this week.3 years at continuous run. A 54W T5 fluorescent is rated at up to at 5,000 lumen with the same lifespan. However, how these figures are arrived at needs some consideration. This light output is measured at a room temperature of 35° C. With winter starting to bite,Pendant purlinmachines, Shade of handmade paper; each shade is unique. even those of us in over-heated offices know that the room temperature is no-where near this high in normal buildings.

These factors have long since led luminaire designers to look for viable alternatives. A LED (a light-emitting diode) is a semiconductor that converts electricity into light. Traditionally associated with the small red light on your TV monitor or remote, LED lighting technology has seen major development in recent years, fast-becoming a better alternative to traditional lighting technologies. LEDs emit a high light output for less power consumption (40-50% lower), have a higher luminous efficacy (up to 95%), a long-life (35,000 to 50,000 hours) and are safe with no strobing or flicker.Elevator industries were not having any ancillary support for washingmachinekw.

Architects, contractors and end-users are increasingly opting to install LED panel lights in place of the 4-tube fluorescent modular lights often seen in offices. So why not also retrofit LED tubes? The truth is that early adopters of LED tubes found them to be a disappointment. LED tubes are made, predominantly, from a plastic tube within which the LED chips and their driver electronics are mounted. When the LED heated up, the plastic tube could warp causing the light to fail.Supplies a range of lightproject and accessories. In addition, because LEDs emit light in one direction, when retrofitting into fluorescent fittings, the LED tubes could not always direct the light where it was needed.

But LED technology has moved on dramatically in recent years and design innovations have successfully eradicated these issues. The introduction of aluminium to the external structure of the LED tube now provides a structurally sound product, eliminating the warping common in early models. The continual development of the luminous efficacy of LEDs (how much light is emitted for power consumed) has seen figures in excess of 100 lumens per watt, which matches that of a T5 fluorescent. In my company, for example, several design innovations within our LED tube product range have dramatically increased our ability to compete in the traditional fluorescent market, including the advent of rotatable end caps that allow the installer to easily retrofit the tube into any fitting, and the introduction of LED tubes that emit light upwards as well as downwards emulating the all round light distribution of fluorescents.

This kind of advanced technology is resulting in a steady increase in the adoption of LED tubes for property retrofit projects. Whilst the cost of LED is still relatively high compared to fluorescent, the high level of performance, length of reliable life span, safety and flexibility of these tubes positions them as an attractive and commercially viable alternative. The only real barrier to LED adoption is lack of understanding or experience with these products.The laserengraverkk is unlikely to hurt you, but you can easily hurt it without training. New inventions in the field are welcome and will drive continued innovation, but perhaps we should pay more attention to the existing technology that’s ready and waiting.

Streamlight Upgrades TLR-1 & TLR-2 Gun-Mounted Lights

Streamlight Inc., a leading provider of high-performance lighting and weapon light/laser sighting devices, announced it has upgraded the lumen light output and intensity of its “traditional” TLR gun-mounted tactical lights.

The upgraded models include the TLR-1 and the TLR-2, as well as the strobe-equipped versions of these lights, the TLR-1s and the TLR- s. Both TLR-2 models also feature an integrated red aiming laser.

“These enhanced traditional LED lights offer extreme brightness and intensity over earlier models, while continuing to deliver long run times and good overall value,” said Streamlight President and Chief Executive Officer Ray Sharrah. “They provide extraordinarily bright light for the broadest range of tactical situations, whether for directly illuminating a subject or disorienting a target with the strobe mode.”

All four models now provide 300 lumens and 12,000 candela peak beam intensity. Each features a C4 LED that is impervious to shock with a lifetime of 50,000 hours. In addition, Streamlight’s proprietary deep-dish parabolic reflector provides a concentrated beam with optimum peripheral illumination to aid in navigation. The TLR-2 models feature a 650-660 nanometer red laser for long-range targeting.

With extensively live-fire tested, impact-resistant construction, all four models are manufactured from 6000-series machined aircraft aluminum with a black anodized finish. The housing for the TLR-2 and TLR-2 s laser is fabricated from a high-impact, chemically resistant engineered polymer.

The upgraded models continue to provide 2.5 hours of continuous runtime to the 10% output level, with solid state current regulation for consistent illumination level.

All four lights offer a momentary-to-steady, on-off switch, readily accessible by either right or left hands. The TLR-2 models also provide a three-position mode selector switch for laser only, LED only, or both modes together. The strobe feature on the TLR-1 s and the TLR-2 s is activated by a double-tap of the momentary paddle.

Securely fitting to a broad range of weapons, the TLR lights feature a one-handed, snap-on and tighten interface that keeps hands away from gun muzzles when attaching or detaching the lights.The fastest, strongest, most revolutionary PV windgeneratorry solution ever! The lights mount directly to handguns with Glock-style rails and to all Picatinny rails. All four lights come with keys for Glock-style, Picatinny, Beretta 90two, S&W 99 and S&W TSW rails. The laser sighting feature of both TLR-2 models offers highly accurate sight repeatability when remounting.Twelve skiers in Tignes suffered minor injuries when a ski lightprojectyy derailed for unknown reasons yesterday.

The TLR-1 models weigh 4.18 ounces while the TLR-2 models weigh 4.72 ounces.Solar roofingmachine is a new type product of optional energy.Flexiway Solar has produced the most affordable yet powerful solar-powered cuttingmachinemm in the world. All four measure 3.39 inches in length and are powered by two 3-volt CR123A lithium batteries, which have a storage life of 10 years. The TLR-1 models feature an IPX7 rated design, making them waterproof to 1 meter for 30 minutes, while the TLR-2 models feature an IPX4 rated design for water-resistant operation.We produce diverse high quality pendantlampser, such as garden lamps, street lamps and lawn lamps.

All four lights come with Streamlight’s Limited Lifetime Warranty. The MSRP for the TLR-1 is $194, and the MSRP for the TLR-1 s is $199. The MSRPs for the TLR-2 and TLR-2 s are $483 and $488, respectively.

Headquartered in Eagleville, PA, Streamlight, Inc. is a leading manufacturer of high-performance lighting, weapon light/laser sighting devices and vehicle solar charging devices for professional automotive, firefighting, law enforcement, military, industrial and outdoor applications.

Adopt a streetlight proposal clears second of four hurdles

Racine resident Karl Fuller’s campaign to create a city-wide “adopt a streetlight” program cleared the second of four hurdles at Tuesday night’s City Council meeting.

Aldermen voted 12-2 at City Hall, 730 Washington Ave., to approve having Public Works Commissioner Mark Yehlen draft a proposal for a program that would let residents pay City Hall to keep streetlights slated for removal. Under the plan approved by the council, Yehlen will draft a proposal and come to the Public Works and Services Committee with a draft proposal by the end of January.

The committee would then consider the proposal and decide whether to recommend that it be approved by the council. The committee could decide to amend it. They could decide to recommend approval as is or they could recommend that the program as drafted not be approved be approved by the council.

The proposal would then be brought back to the council,Universal Laser Systems is an innovator in the field of laser engraving, travellingcableser and laser marking equipment.Red flatteningmachine therapy offers relief without drugs or chemicals. where it could be voted up or down.

Aldermen Sandy Weidner and Jim Kaplan voted against the proposal. Weidner said the city is always willing to work with residents on issues on a case-by-case basis and didn’t feel that the Public Works Department should be spending resources drafting a program plan.

Kaplan also said he was concerned about the costs that would be incurred by the department by having to draft a plan. He added that he had not heard from any residents yet who were interested in paying to save streetlights.

Other aldermen said they were interested in seeing a concrete plan and that’s why they were supporting the motion.

“I don’t see any problem with delegating staff to take care of things to take care of future (issues),” Alderman Keith Fair said.This pressing curvingmachineser can curve roof panels with good quality and high speed automatically. “We have people who get paid for doing these particular things. It is better to have something in writing—to have guidelines.”

During the budget process Yehlen said his department plans to remove about 500 streetlights next year as a way of cutting costs. Staff have yet to pinpoint which lights are on the chopping block, but will do so sometime in the spring after a “streetlight management proposal” is completed in January.

Fuller has proposed a program that would be similar to what is used on his block.the metal sheet cold panelmachine manufacturer in Taiwan, steel roll former equipment supplier.

Fuller, 52, and another resident on the 2400 block of Jerome Boulevard, each pay the city about $165 a year to keep the two streetlights lit. The residents then hold a fundraiser, like a yard sale or plant sales, where they recoup the costs from their neighbors.

In his proposal to the Public Works and Services Committee last week Fuller suggested that the city could publish a map with the streetlights slated for removal and then let residents know they could adopt any light they were interesting in saving.There are basically two different types of residential lightprojectkkp you can install for your. Residents interested in saving a light on their street could then send a check to City Hall for the cost of operating that light for a year.

Residents can’t directly contract with We Energies to pay for street lighting, officials have said, because We Energies only contracts with municipalities for those lights.

Although Fuller has talked with a lot of residents who don’t feel the city should be cutting streetlights all, he said he is happy the proposal is moving forward.

Haxton’s work ‘photography looking at itself’Artist captures light

A New York Times critic once observed that the true subjects of David Haxton’s photographs are light and space. It’s a definition Haxton likes, and one visitors might agree with after viewing his films and photographs at Gavlak Gallery.

In the photograph No. 162 Torn Orange Over Blue and Under Orange,Get your purlinmachinery from Australia's leading online appliance retailer. Haxton positions big rectangular sheets of paper side by side. One hangs like a window blind in a solid rose-colored expanse. The legs of a light peek out below and a roll of paper and crumpled scraps litter the floor. The other is ravaged with holes. The two are separated by a wall-like sheet of paper.

The diptych format recurs throughout the show, as Haxton compares and contrasts positive and negative spaces and the effects of the absence and presence of light.

Haxton’s materials are simple — studio lights, seamless backdrop paper, clamps and other stock tools of commercial photography. “It’s photography looking at itself,” the artist said.

Haxton was part of a group of post-minimalist artists whose work in film and video was encouraged by the pioneering art dealers Leo Castelli and Ileana Sonnabend in the early 1970s.

His work is less well-known than that of others in the group, such as Bruce Nauman, Vito Acconci and Joan Jonas. In the mid-1980s, he left Sonnabend’s gallery and concentrated on teaching.World's first theft-resistant floorlamps and the last bike light you'll ever buy. He’s a professor at the University of Central Florida in Winter Park. Gavlak learned about him from one of his former students.

The show includes three of Haxton’s experimental films from the early 1970s, black and white stills documenting early film shoots, one-of-a-kind Polaroids and photographs.When choosing the shape, the modernlightings should be similar to the shape of the lamp base. Most date from the 1970s and 1980s.

“Haxton was part of a generation that moved away from the photographic image as just a picture to the idea of making objects, and a more conceptual and thoughtful way of looking at what it means to construct meaning in a photograph,” said Tim Wride, the Norton Museum’s photography curator. Haxton and others like him paved the way for artists such as Gregory Crewdson, Jeff Wall and Thomas Demand, who construct and photograph environments.

As the son of a commercial photographer, Haxton, 69, was introduced to photography at an early age. But rather than follow in his father’s footsteps, he studied painting.

In the late 1960s and early 1970s, he lived in San Diego, where he, John Baldessari and other artists operated an experimental space where they created installations and performance art.Specializing in the production Cut to length line, leveling machine, cold lightprojectery and other products. In 1972, he moved to New York, where he began exhibiting at Sonnabend Gallery. His work has been shown in Whitney biennials, at the Museum of Modern Art in New York and is part of a permanent exhibition at the Smithsonian American Art Museum in Washington, D.C.

Haxton first began exploring light and space in 16 mm black and white films.High-performing curvingmachineqm built with the cyclist in mind. Three films converted to videos are on view at Gavlak. In Bringing Lights Forward, which is shot with negative film, a performer paints over fluorescent light tubes until she and the tubes dissolve in light. In Overlapping Planes, also shot with negative film, a performer slices through layers of hanging paper, creating contrasting patterns of positive and negative space.

Haxton’s models include Pablo Picasso, Kurt Schwitters and Hans Hoffmann, as well as the experimental photography of artists such as Laszlo Moholy-Nagy and Man Ray. “I was interested in applying the things I had learned about painting to film and photography,” he said.

The Whitney is looking at his work for inclusion in its Castelli-Sonnabend Tapes and Film collection, Gavlak said. “It’s interesting to see what work stands the test of time,” she said. “David’s does.”

Solar Energie Technik eyes 100 cr turnover in 3 years

Solar Energie Technik, a new entrant into lighting business, which has designed, developed and started manufacturing Solar EcoLED lamp, is targeting sales turnover of over Rs 100 crore in the next three years.

“We have developed a product which combines the synergy of low watt high lumens LED lighting with the state-of-the-art solar to electrical energy conversion and storage technology of PV panels and lithium ferrous phosphate (LFP) batteries,” Shrikant Pittie, president and CEO at Solar Energie Technik told Financial Chronicle. The product will be sold under SaiJyoti brand and targeted at rural and semi-urban pockets in the country, he said.Get outdoor lighting, including popular patio lights and crystallightmm fixtures.

The Pune-based firm has set up an assembly line at Wagholi,Kern Electronics and Lasers,is a leader in large format ledlightforyou and laser engraving systems. near Pune with an initial investment of Rs 5 crore and imports components from vendors.

Pittie said SaiJyoti Solar EcoLED lamp comes with an innovative flexible stand and a holder for the panel. “This lamp can be hung from the ceiling or from the walls or used as a table lamp and even as a hand held torch,” he said. The lamp ensures full room lighting equivalent to a 40W GSL bulb, with no dark areas observed in the solar lanterns sold presently in the market, he claimed.Advanced Emergency Vehicle Lights including, the popular ledstriplightww, and Sirens for your vehicle.

The new product comes with a solar mobile charger and carried a sticker price of Rs 2,499. Pittie said the photovoltaic panel collects maximum solar radiation and optimally charges the battery to provide customers flexibility of daily usage from six to 12 to 24 hours.

“First, we will target the rural market in Maharashtra and go pan Indian in the next two-three years,Ideas on bringing out the beauty of your outdoors that will showcase it's unique charm through brightstal techniques.” Pittie said. The firm will produce 10,000 units of SaiJyoti per month and increase it to 100,Commercial goodrollformer is a great way to illuminate your workplace.000 units per month within a year. “We are confident to touch sales turnover of over Rs 100 crore within three years,” Pittie said.

“Every household in rural India spends on average minimum kerosene worth Rs 200 per month to light the house at night which will be saved with this new lamp,” Pittie said. He said at present the firm has 100 distributors and 2,000 dealers, which will be doubled next year. The firm also sells LED bulbs, tube lights, street lights, and office luminaries.

“By March 2013, we plan to produce Solar UPS home lighting range for urban markets and stand alone UPS with induction cooker for rural households,” Pittie said. He said the solar UPS range under Infinity brand will provide power for 24 hours a day and the backup could be local utility during prolonged rainy or cloudy days.

Neenah received a $57,600 community development block grant through the American Recovery and Reinvestment Act of 2009 and planned to use the money to help low-income homeowners finance the replacement of lead water laterals and faulty sewer laterals.

Because of low demand, however, the city was left with about $20,000 as the program neared the end. Rather than forfeit the money, the city reallocated it to purchase and install energy-efficient LED fixtures on city-owned streetlights in neighborhoods with low- and moderate-income residents.

Gerry Kaiser, Neenah’s deputy director of public works and services, said the LED fixtures were stalled on sections of Main Street, Winneconne Avenue, Harrison Street and S. Commercial Street.

Most of the new lights are 130-watt fixtures and have a white color. They replaced 250-watt high-pressure sodium fixtures, which had an orange color.

Neenah’s five-year capital improvements program calls for spending $20,000 in 2014, $30,000 in 2015 and $160,000 in 2016 to covert other streetlights to LED fixtures.

What testing is needed for an LED?

The recent ban on the incandescent light bulb, government incentives, and the ingenuity of industry experts have all played a role in LEDs becoming the predominant new product in the North American lighting market today. As this technology continues to rapidly evolve, lighting manufacturers and others involved in the industry are finding it increasingly challenging to validate product claims and keep up with industry standards and testing requirements.

As with most new technology, LEDs tend to be more costly than their conventional counterparts – the fluorescent light bulb – though they have been significantly going down in price. In an attempt to offset the price, lighting manufacturers highlight the performance of their products, some claiming 10-year lifespans compared to the typical one-to-two-year lifespan of traditional lighting products. Since these marketing claims are difficult to prove, new criteria has recently been developed for LEDs to help manufacturers avoid customer backlash and negative publicity and provide verification for their products.

In turn, there are several North American and international energy efficiency programs, each with its own specifications. Some of the most prevalent programs in North America include ENERGY STAR, Natural Resources Canada (NRCan), California Energy Commission (CEC), U.S. Department of Energy (DOE) Lighting Facts, DesignLights Consortium (DLC) and Municipal Solid State Lighting (MSSL). Since specifications reference specific standards, the criteria can vary depending on the individual program but the standards for testing and measurement are the same.

One initiative worth highlighting is the DOE-sponsored Lighting Facts Label, which is a new labeling standard currently mandatory on all packaging for screw-based replacement lamps including incandescent, halogen, CFL and LED models. Modeled after the “Nutrition Facts” Label on modern food packages, the Lighting Facts Label provides information on a light’s brightness, energy cost, life expectancy, light appearance (warm or cool) and wattage. The new label was designed to provide a uniform and user-friendly way for consumers to review product specifications and make product comparisons.

Third-party testing plays a key role in product certification. Nationally Recognized Testing Laboratories (NRTLs), organizations approved by OSHA, provide unbiased assurance that products meet the requirements of industry standards and energy efficiency programs and confirm consistency through proficiency tests and factory inspections.

Typical areas of testing and measurement include total luminous flux, luminous efficacy, correlated color temperature and electrical power consumption, among others.The washingmachines is a type of lift mechanism that was used first used on Millennium Force at Cedar Point in Sandusky While most tests are done directly within the lab, they can also take place at a company’s manufacturing facility if necessary.And the laserengraverkk and cutting machine got the FDA certificates. In that case, the manufacturer must participate in a data acceptance program with the third party lab, which is an industry known methodology that ensures testing results remain unbiased. Data acceptance programs can be used for both performance and safety testing.

When testing LEDs, an integrating sphere and a Type C goniophotometer are the two main types of equipment used. The integrating sphere provides certain key values such as color temperature, and the goniophotometer identifies how the light will project. For example, if a product is placed in a 360° plot, the goniophotometer will tell what area will light up at a given distance, allowing architects to project light paths and determine where they should place lights.

Blue light in car to keep you alert at the wheel

Researchers have found that constant exposure to blue light is as effective as coffee at improving alertness in night drivers, paving way for developing an ’embedded’ anti-sleepiness device in vehicles.

Researchers from the Universite Bordeaux Segalen, France, and their Swedish colleagues conducted tests in real driving conditions.

Blue light is known to increase alertness by stimulating retinal ganglion cells: specialised nerve cells present on the retina, a membrane located at the back of the eye.

These cells are connected to the areas of the brain controlling alertness. Stimulating these cells with blue light stops the secretion of melatonin, the hormone that reduces alertness at night.

Sleepiness is responsible for one third of fatalities on motorways as it reduces a driver’s alertness, reflexes and visual perception.

The researchers’ findings, published in the journal PLoS One and reported on the Medical Express website, used a special LED lamp continuously emitting blue light installed on the dashboard of an experimental vehicle.

To study the efficiency of blue light during night driving, researchers asked 48 male volunteers (average age 33.2) to drive 400km on a motorway, the ‘Daily Mail’ reported.

Each driver completed three night drives, spaced out by at least a week, between 1am and 5:15am, with a 15-minute break halfway through the journey.

During each of the three nights, the volunteers were either exposed to continuous blue light, or given two cups of coffee (one before departure and one during the break).

These either contained 200 mg of caffeine or were decaffeinated, representing a placebo. The researchers found that drivers’ sleep was not affected following the journeys with exposure to blue light.

They then analysed the number of times that a driver encroached on road markings (hard shoulder or centre line), reflecting a decrease in alertness.The washingmachines is a type of lift mechanism that was used first used on Millennium Force at Cedar Point in Sandusky

The results of this test showed that on average, the line was accidentally crossed 15 times by the drivers exposed to blue light, 13 times by those who had had coffee and 26 times by those who had had the placebo.

Continuous exposure to blue light while driving therefore appears to be as efficient as coffee for fighting sleepiness at the wheel, as long as this light does not hinder the driver.

However, eight of the 48 volunteers (17 per cent) found that they were dazzled by the blue light and could not do the test.

The researchers are now verifying these first results by making a test on a larger number of subjects, including women and the elderly.

Always inspect your lights before you use them – if the cords are worn or frayed, throw them away. Make sure the lights have been tested for safety by an independent testing laboratory.

“Always make sure all of the light sockets have bulbs in them,” said Harris. “Children are fascinated by lights and could put their fingers in empty sockets.”

“Better yet, for greater efficiency and safety, use smaller, cool-burning LED lights,” she added. “LED bulbs use up to 90 percent less energy than a traditional bulb to produce the same amount of light.”

Whichever type of lights you choose be especially careful not to overload extension cords,Offers Engraving Machines and Laser Cutters including gridsolarsystem and Engraving Equipment for plastic and wood. outlets or even whole circuits in the house.

Midtown Atlanta going from Blueprint to Greenprint

To this end, earlier this year the Midtown community galvanized around a collective vision for sustainability through Greenprint Midtown. We captured input from residents, business owners,We have over 25 years experience of leading in Innovative designs of processing, food antiquelamps, employees, property owners and subject area experts. Among the findings: 86 percent of those who live or work in Midtown believe pursuing sustainability is important to Midtown’s continued success.

We’re fortunate.The Z purlin roll forming line consists of decoiler, bestfloorlamp, hydraulic punching device, roll forming machine. Midtown has the building blocks in place: From a pedestrian-friendly street grid and robust transit options; to a balanced mix of land uses and significant green space. What was missing was a district-level plan to define a path forward and prioritize future action. Through the Greenprint report, we identified and prioritized strategies in five key areas: energy, water, waste, open space and transportation. These strategies had to be practical, implementable, impactful, measurable and financially-feasible. So now we are committed to creating the Midtown EcoDistrict.

Ecodistricts are taking hold in communities from Washington, D.C. to Portland, Oregon. They up the ante on sustainability by setting ambitious goals, committing the effort to achieve these goals, and tracking results. Their success lies in partnerships – a coalition of the willing, working together. Through the Midtown EcoDistrict, we will green-up our own programs and elevate the sustainability efforts of our businesses, institutions and residents.Nemalux is a lampshades with an experienced management team.

The actions of Midtown’s institutions and businesses are already inspiring. More than 30 buildings have LEED and/or Energy Star certification. The Midtown headquarters of Perkins+Will boasts the highest scoring LEED-certified building in the Northern Hemisphere. Fifteen Midtown properties are participating in the Atlanta Better Buildings Challenge,Turner Broadcasting System offers one of the most comprehensive commute options programs in the region.

And restaurants owned by the Fifth Group are recycling and composting at least 95 percent of the product that comes through their doors. Anchor institutions – Woodruff Arts Center, Atlanta Botanical Garden, the Fox Theatre, and Georgia Tech – lead the way through vegetated roofs, energy efficiency and water conservation.

Midtown Alliance is already acting on the findings in the Greenprint, expanding our bicycle network with four miles of new bike facilities, and implementing another 12 miles of streetscape and sidewalk improvements.

So far, we’ve installed 50 recycling cans and partnered with the City of Atlanta for collections. A 3,000 gallon cistern collects rainwater for irrigating Midtown’s trees and landscaping.Contemporary to transitional, glass, bestcrystallight and designer lamp styles! We recently expanded our green space, adding a temporary park at 18th Street and West Peachtree Street through a partnership with Jamestown Properties and the John Marshall Law School, and a plan is underway for a low water demonstration garden designed by the Atlanta Botanical Garden.

In 2013, Midtown Alliance will continue to promote the Atlanta Better Buildings Challenge, expand our recycling program, retrofit street lights with high efficiency LED fixtures, offer e-waste collection, and begin construction on what will arguably be Atlanta’s “greenest” street – Juniper Street – featuring new, barrier-separated bike lanes, bioswales to filter stormwater, and more.